Finally got a system I've been wanting for years... Much thanks to the Vintage Mac Museum for this.
-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
At last, a Lisa
- Thread starter blusnowkitty
- Start date
Huzzah! They're such interesting machines.
NICE -
I have two but both have the square pixel mod and so far i've only been able to boot up into macworks. the Hard drives / floppy drives that came with them don't work.
(i used a floppy emu to boot images)
How is the screen? I find mine can't hold a straight vertical line. I've gotten it better with new recap'd powersupply. But yeah the warping is still there. (most noticable with up/down lines.)
I have two but both have the square pixel mod and so far i've only been able to boot up into macworks. the Hard drives / floppy drives that came with them don't work.
(i used a floppy emu to boot images)
How is the screen? I find mine can't hold a straight vertical line. I've gotten it better with new recap'd powersupply. But yeah the warping is still there. (most noticable with up/down lines.)
It’s a 2/5, not the later 2/10 or Mac XL.
My screen is okay and pretty stable, though I need to re-recap the PSU with caps rated for a higher ripple current. You should pull the analog board out of yours and recap it, as well as reflow all the joints and shoot deoxit into the trimmer pots.
Last edited by a moderator:
Some of us have had the same issue after recapping and were discussing it on another thread - check this post out:
