-
Hello Guest! We're hosting a challenge to welcome vintage Intel macs to the MLA during the month of July! See this thread for more information. -
We've made some quality of life improvements to the Trading Post. More info here.
AppleVision 1710AV Monitor + KVM Issues
- Thread starter CelGen
- Start date
Actually, I pulled the KVM apart. It's passive for a few exceptions:
On the three system inputs:
Pin 7 is linked to 10 with a diode
Pin 4 is jumpered to 11
On the Monitor output:
Pin 4 is disconnected
Pin 7 is disconnected
Pin 10 is disconnected
So none of the sense pins are at all attached if that means much.
On the three system inputs:
Pin 7 is linked to 10 with a diode
Pin 4 is jumpered to 11
On the Monitor output:
Pin 4 is disconnected
Pin 7 is disconnected
Pin 10 is disconnected
So none of the sense pins are at all attached if that means much.
