Adjust screen width in a Mac Classic

[Carpallo]

Hi everyone!

I have adjusted the screen heigth and vertical position in the screen but I don´t know how to adjust the screen width. Should I use the top hole on the right?

Thanks in advance!

 

[Johnnya101]

I'm pretty sure with the case off on the analog it's one of those holes... should be labeled on the protective cardboard.

 

[BadGoldEagle]

It's a Classic, so it's not labeled. And you have to make the adjustments on the back, not on the side.

Here's a pic that you'll find very useful. From https://ancientelectronics.files.wordpress.com/2013/01/cmt161.jpg?w=510

You need a plastic tool to adjust some of those potentiometers. Wooden Kebab sticks are a suitable replacement. But I'm sure you already have one, since you've already tinkered with horizontal width.

 

[Carpallo]

Wow,awesome,thank you... That is what I needed...

 

[Carpallo]

It was the only hole I had not tested yet, so I supposed it had to be to adjust screen width... Thanks for the picture