OOPS! Hit post too soon!
Last edited by a moderator:
-
Hello Guest! We're hosting a challenge to welcome vintage Intel macs to the MLA during the month of July! See this thread for more information. -
We've made some quality of life improvements to the Trading Post. More info here.
68030 PDS: implimentation inconsistencies?
- Thread starter Trash80toHP_Mini
- Start date
Has anyone else noticed inconsistencies in the way Row 40 of the passthru slots of cards for SE/30/IIsi are implemented? Are there other instances?
-12V at A40 - has connection inconsistencies in implementation?
_____ OK ___ Asante NIC
_____ NC ___ RCPII/IIsi Pivot VidCard
_____ NC ___ SuperMac RA Adapter
-5V at B40 - doesn't appear to be connected on any of these passthru slots? Very strange.
_____ NC ___ Asante NIC
_____ NC ___ RCPII/IIsi Pivot VidCard
_____ NC ___ SuperMac RA Adapter
+12V at C40 - connection is consistent.
_____ OK ___ Asante NIC
_____ OK ___ RCPII/IIsi Pivot VidCard
_____ OK ___ SuperMac RA Adapter
Why would the -5V lines be NC on on all three cards?
Why might the -12V connection be unimplemented on the Pivot card.
Why are the two Video related cards differentiated from the NIC. very curious.
Need to check my other Asante NICS, Radius Pivots andSuperMac RA adapter for IIsi. Very strange? :huh:
-12V at A40 - has connection inconsistencies in implementation?
_____ OK ___ Asante NIC
_____ NC ___ RCPII/IIsi Pivot VidCard
_____ NC ___ SuperMac RA Adapter
-5V at B40 - doesn't appear to be connected on any of these passthru slots? Very strange.
_____ NC ___ Asante NIC
_____ NC ___ RCPII/IIsi Pivot VidCard
_____ NC ___ SuperMac RA Adapter
+12V at C40 - connection is consistent.
_____ OK ___ Asante NIC
_____ OK ___ RCPII/IIsi Pivot VidCard
_____ OK ___ SuperMac RA Adapter
Why would the -5V lines be NC on on all three cards?
Why might the -12V connection be unimplemented on the Pivot card.
Why are the two Video related cards differentiated from the NIC. very curious.
Need to check my other Asante NICS, Radius Pivots andSuperMac RA adapter for IIsi. Very strange? :huh:
Last edited by a moderator:
I figured +12V is on the LC Slot for the FDD on the end of the IIe card's cable, but it's OK on all cards tested anyway.
Figured the VidCard thing for the adapter, but not passing it through on the Pivot seems very strange.
No -5V passthru connection on any of the cards sticks out like a sore thumb to me.
Figured the VidCard thing for the adapter, but not passing it through on the Pivot seems very strange.
No -5V passthru connection on any of the cards sticks out like a sore thumb to me.
