Now there’s 3 of us! Although presently none of mine are working.. I’ve went from 3 working to 0 in the space of a week… can’t catch a break
-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
32 bit Clean roms for SE/30 and Tantalum capacitors.
- Thread starter wildstar1063
- Start date
Yay!Now there’s 3 of us! Although presently none of mine are working.. I’ve went from 3 working to 0 in the space of a week… can’t catch a break
Caymac 4 and 8mb simms.
Purplerom 2mb
SMC (Satanic Mac Club / Kero's Mac Mods) ROM
The IIsi-based ROM is less picky about which RAM is in which slots. It will work with RAM only in bank B for example.
You learn something new everyday! Thanks for the info @obsolete
Yes, MODE32 does a separate memory test after flipping into 32 bit mode. It does also call the Close method on the video driver which canonically should disable the display (but SE/30 CRT can't disable video, so it just stays as is).
Technically, my ISP-SIMM is also 32 bit clean when an IIsi ROM is flashed, but that's more in the nature of a specialized development device
Technically, my ISP-SIMM is also 32 bit clean when an IIsi ROM is flashed, but that's more in the nature of a specialized development device
The Rominator II doesn't come with the fitment clips, because BMOW was able to find a PCB manfacturer who could make the proper 0.5 mil size:
Mac ROM-inator II Restock and Partnerships | Big Mess o' Wires
and previously mentioned
Mac ROM-inator II: The Thickening | Big Mess o' Wires
This phenomenal video from JDW mentions that both the Rominator II and the GGLABS' units are same thickness as the original stock ROM:
This link goes right to point in the video where this is discussed:
I'm interested in the Garrett’s Workshop GW4402B because it has multiple ROMs from the factory, selectable by jumpers on the ROM. Thats pretty cool!! I'm trying to verify if it has custom logo and boot chime, which is something I'd prefer not to have.
The Garrett's Workshop facebook post announcing the GW4402B also mentions they've been able to beef up the thickness of it - it sounds like it has some great features. I didn't know it had multiple ROMs selectable via dip switches on the device. It also has a control panel to configure some aspects of the device like if the ROM is mounted as a disk on boot, using it as a RAM drive, etc:
www.facebook.com
Manual: https://garrettsworkshop.github.io/MacIIROMSIMM/Documentation/GW4402BManual.pdf
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Manual: https://garrettsworkshop.github.io/MacIIROMSIMM/Documentation/GW4402BManual.pdf
There’s also the ROM from the AirTalk Shop, I have one (works great).
Similar threads
