Hi. Today I found a unibody 2009 13" MacBook Pro at the thrift. Here is what it looks like:


I noticed that the palmrest had some very bad indents in it.


Upon further inspection, it seems someone else has been inside the MacBook.

A few screw heads were definitely showing signs of use, and I decided to open it up first.

On the inside, there was a SSD that someone else had put in. There was also 4GB of ram installed and it was quite dusty inside. A few connectors were undone as well an a mount on the battery was broken.

I removed the battery for further inspection, and found this, thing?
I put it back in the spot it seemed to go.


I promptly removed the cooling fan, and found some dust guys in there.

The fan cleaned up well.

I took the motherboard out since I knew it would have been dusty under there as well.


I cleaned off the board. It looked better than before.

I noticed there was some gunk on the MagSafe port so I scrubbed that as well.


I then put it all back together, made sure to plug everything in. It is dust free now. I need to get a magsafe charger, as I don't currently have one for this model. But it cleaned up well for what it is.



I noticed that the palmrest had some very bad indents in it.


Upon further inspection, it seems someone else has been inside the MacBook.

A few screw heads were definitely showing signs of use, and I decided to open it up first.

On the inside, there was a SSD that someone else had put in. There was also 4GB of ram installed and it was quite dusty inside. A few connectors were undone as well an a mount on the battery was broken.

I removed the battery for further inspection, and found this, thing?
I put it back in the spot it seemed to go.


I promptly removed the cooling fan, and found some dust guys in there.

The fan cleaned up well.

I took the motherboard out since I knew it would have been dusty under there as well.


I cleaned off the board. It looked better than before.

I noticed there was some gunk on the MagSafe port so I scrubbed that as well.


I then put it all back together, made sure to plug everything in. It is dust free now. I need to get a magsafe charger, as I don't currently have one for this model. But it cleaned up well for what it is.




