-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
128k ram replacement.
- Thread starter uniserver
- Start date
lol no the seller told me free shipping if i bought one more lot of 500 so i couldn't resist.
Yeah I tell you What changing the ram in these Macintosh 128k not what i would call easy at all.
Mcdermd must go to his happy place when he does these… he makes it sound like, it's as easy as changing your underware
Yeah I tell you What changing the ram in these Macintosh 128k not what i would call easy at all.
Mcdermd must go to his happy place when he does these… he makes it sound like, it's as easy as changing your underware
It's only 256 pins to desolder and resolder, how much could... no, wait, that is a pain in the arse. I suck enough at soldering I need to take a break and go breathe into a paper bag for a while after doing one IC.
Silly question: Are you putting in sockets, or just soldering the chips down? Obviously sockets wouldn't be original, but they're totally worth it in every other way.
Silly question: Are you putting in sockets, or just soldering the chips down? Obviously sockets wouldn't be original, but they're totally worth it in every other way.
oh … no sockets…
but the mcdermd way is to solder them down right to the main board
i've been trying to emulate his work… witch i am finding is very difficult…
I re-ram'd (2) 128 boards last night… they both work too!! one was for me, and one was for a customer.
I didn't get to bed till 6am… I am like a walking zombie today.
I think, I need to crank up the temp on my iron… but i'm already at 750F
Seems like the solder is not really flowing into the through holes as well as i like.
these (2) 128 boards i did, had some slight surface corrosion on the soldered joints.. I am sure that doesn't help things!
but the mcdermd way is to solder them down right to the main board
i've been trying to emulate his work… witch i am finding is very difficult…
I re-ram'd (2) 128 boards last night… they both work too!! one was for me, and one was for a customer.
I didn't get to bed till 6am… I am like a walking zombie today.
I think, I need to crank up the temp on my iron… but i'm already at 750F
Seems like the solder is not really flowing into the through holes as well as i like.
these (2) 128 boards i did, had some slight surface corrosion on the soldered joints.. I am sure that doesn't help things!
I suppose a Mac 128k is pretty much a paperweight when it comes to usefulness, so I suppose authenticity is the way to go.
(Every time I yank something out of one of my toys a socket goes in, which I suppose dings the collector value, but the last thing I want to have to go through desoldering the same part again later. Unless you're actually going to the extreme of tracking down exact replacement parts with appropriate date codes it's still going to show as a "repair" anyway, but, yeah, I suppose it makes the difference between the unit being a "20 footer" vs. "a driver" in car collecting terms.)
(Every time I yank something out of one of my toys a socket goes in, which I suppose dings the collector value, but the last thing I want to have to go through desoldering the same part again later. Unless you're actually going to the extreme of tracking down exact replacement parts with appropriate date codes it's still going to show as a "repair" anyway, but, yeah, I suppose it makes the difference between the unit being a "20 footer" vs. "a driver" in car collecting terms.)
lol it says 750F… can't say that is what its acutely at… as i said it feels like it needs more heat.
I ordered an IR Temp gun.. When it comes in i'll be able to see how hot it really is.
DT-812
-50°C to 500°C
-58°F to 932°F
http://smart-prototyping.com/Prototyping-Equipment/General-Lab-Equipment/IR-Thermometer/IR-Thermometer-CEM-DT-81X---50-degree-to-500-degree-.html
I ordered an IR Temp gun.. When it comes in i'll be able to see how hot it really is.
DT-812
-50°C to 500°C
-58°F to 932°F
http://smart-prototyping.com/Prototyping-Equipment/General-Lab-Equipment/IR-Thermometer/IR-Thermometer-CEM-DT-81X---50-degree-to-500-degree-.html
I am too cheap to afford a hakko. So what I do is clip out all the chips, pull all the pins, and use a VERY tiny drill bit and drill in the center of each hole, avoiding the Via plating. That works for me. lol.
This is assuming solder braid fails for me.
This is assuming solder braid fails for me.
