Search results

Would I need them if I were driving a modern lcd with Rezafoulidians design for the external video out?

Thanks very much! Would you need CL1 or M for the display to function normally? Why would they only be on the internal not the external then?

Sorry I thought there was a gerber.

Okay, that is really small. I hope you can fix it.

Can you use a tap and die set?

Also, what type of connector is the display connector on the board? Does anyone know?

Is M supposed to do anything? I dont think it's connected to anything.

Do you know the difference between cl1 and cl2 on the schematic?

Ah okay! Thank you very much! I just got my portable working and I am waiting to put it back together until I can do the 2 diode mods, (waiting for shipping is a bear.) So I was just thinking of trying to take a portable video adapter and adapting it to the display connector on the inside. For...

Thanks! And I found that the J stands for the plug and pin, but I don't quite understand what the parenthesis on the end of the net stands for do you know what it means?

Does anyone know if there is a difference between FPDATAI and FPDATAX nets in the portable video outs in the schematic?

Don't know if it's needed but I found this if you need a reloaded board. I am still hoping you can fix yours. https://tinkerdifferent.com/threads/logic-board-macintosh-classic-reloaded.26/page-2

That's horrible! I hope you can fix it. I just got mine up and running, booting from a bluescsi after reflowing solder.

Has anyone done the diode mod for external scsi power and can show me how to hook it up, and has anyone done the zener diode mod shown here:Zener. And can show me how to do it?

I'll try to send a video later.

I might have a surprise!!!

Can't wait to see it finished! It looked bad at first but with it cleaned it looks like it might actually be repairable! Have fun!

Thanks!

I found out that the DS3691V chip has a couple pins that hove become disconnected. Is it fixable because the pins are almost impossible to see the break, and would i be able to reflow the solder with a soldering iron? Also if it needs replacing what would I replace it with because I cant find...

Just a question, I am going over every single component on the board and have found 2 resistors and 1 transistor that are bad, I was wondering if any of the ram chips are actually bad or if they go bad. Because I don't want to throw the parts cannon at the mother board. Thanks!