Search results

Agreed. Thanks.

Also no bridges.

KNOWN SO FAR CPU - Working Correctly (Swapped from good board) ROM SIMM - Working Correctly (Swapped from good board) RAM SIMMS - Working Correctly (Swapped from good board) VIDEO ROM - Working Correctly (Swapped from good board) VIDEO PALS - Working Correctly (Swapped from good board) VIDEO RAM...

I have a reloaded board in a Simasimac status. Current clock signals are: Y1 = 32Mhz in spec Y2 = 32Mhz in spec GLUE PIN 17 = 32Mhz in spec GLUE PIN 18 = 16Mhz in spec Y3 = Erratic, Intermittent supposed to be 16Mhz? Sometimes around 10, sometimes no reading. Anyone have any idea what might be...

General Logic Unit? Seems you're correct. Says GLUE on the SE/30 silkscreening. What does the E stand for ?

that is excellent to know. Thank you for that info.

absolutely not sure but it's my best theory at the moment because it had a good deal of corrosion when it came off the bombed board. Pins were OK and it cleaned up ok. Wouldn't hurt to have another if I can pick up a iici or whatever relatively cheap.

Need to find another one the cheapest way possible. Thanks for any help.

(for idiots perhaps...). I've got a Simasimac reloaded SE/30 board and I suspect the GLU chip is at fault. It cleaned up well but was kinda rough when I got it off the bombed board. I have checked all pin continuity several times and everything checks out to destinations. No bridges also...

Thanks! :)

I did try but nobody ever responded to my request. I might pop in every once in awhile. I just noticed this was the exact issue I'm currently having with my reloaded board.

Hi, did Will explain the root cause of the slow death chime and horizontal lines? Sorry if I missed that in the thread. I'm in the exact same situation with my reloaded board. Thanks for any info. sorry I see the explanation now. Disregard.

Right. The external port.

It's true. Apologies for asking again but I figured I'd get all my questions in one post and was still hoping there would be some way to test it with an oscilloscope, multimeter and the datasheet if it exists. I will accept defeat lol.

Thanks very much for your help!

Sorry, here are the pictures.

As I’m working on an SE/30 reloaded board, a few questions have arisen, If anyone would like to offer any knowledge or advice, I’d appreciate it. 1] U32 Crystal Oscillator (see pic) appears to be polarized based on the silkscreen on the board? As I was cleaning the parts, the writing on the top...

Full recap of the analog board is pretty easy and cheap compared to other restoration needs. No reason not to do that.

hmmm..seemed like a reasonable question. Just wondered if it was a certain range of years. Thanks for the info anyway.

By serial number or other? Is it true that these are the most prone to leaking? That has been my own experience.