Search results

It works with Floppy Emu : https://www.journaldulapin.com/2018/02/24/apple-iie-card/ Actually, it works too with the internal floppy disk, without problems. The size of the disk image is a little problem : if the disk image is not the exact size (800 KB or 140 KB), the Floppy Emu will not see...

It's very complicated to find a LCD (or even a CRT) who accept Sync On Green. A home, i have many display, and the only way to have an image is my acquisition card.

This one (in the center)

I have tried a PowerPC 604 from an IBM machine on my G3 BW : it will not boot, with a long beep. 

Actually, the Mac PB is an LocalTalk to EtherTalk adapter, but he can draw power from ADB (or external adapter). Many Farallon adapter are faster than "normal" adapter : with an external quartz, it's possible to speed up the connexion to ~1 Mb/s (only ~230 kb/s with Localtalk). But only with...

I'm not sure with this specific adapter, but i have a Microtech XpressSCSI USB to SCSI adapter and it works without driver or with driver. Without driver, i can connect one SCSI storage peripheral (just use ID0) and it works as a USB Mass Storage driver. With driver (for old OS like Mac OS 9...

You can use a Jamport : it's a peripheral like the Stealth Port. http://alexhixon.com/projects/jamport/ The adapter replace the modem to add one serial port. It works with MIDI.

I will try that. I have one, but not the power supply, but with the information, i suppose i can adapt one.

You can't use the Fat Back with a dual PCI riser, i have tried that (and failed). With the Fat back, you must use the CommSlot riser and the right PCI riser (i have not found a model with the good size)

It's my website I like the Pippin, and i have many things about this console ! Actually, i have a modded console with hard drive, better CD drive 24x), memory and the floppy drive. The next things is to build a PCI adapter

I don't know if Mac OS 9 support that, but a graphic card with a DVI Dual Link output is OK for 2560x1440 and many display can use this mode. With VGA? it's complicated, it depend from the RAMdac speed and many display cannot display in analog at native definition. But there is a (big) problem...

It's not a good idea on the Power Mac 6100 : the x86 is on top of the PowerPC 601. If you install a fan on the x86 CPU, the heat from the x86 goes direct to the PowerPC, and after go the top of the card... on the x86 CPU. Nope. The x86 on the ODS card is a 486 DX2 (5 V) and you can replace it...

I have tested with a USB to DE9 and DE9 to Mini DIN without problem (http://www.journaldulapin.com/2014/09/23/faire-fonctionner-une-imprimante-imagewriter-ii-sous-mac-os-x/). You can find USB to Mini DIN, but there is many problems with drivers on modern Mac OS X. For the parameters : 9600...

USB to FireWire will not work. It's just "scam" : it works only with peripheral who can send a USB signal on FireWire connector (very very rare). But on a modern Mac with Thunderbolt, you can use Thunderbolt to Firewire and use the first iPod without problem.

Actually, i use a riser found on Amazon. The size is OK (the height), but it's misaligned with the fat back. The Apple dual PCI riser is OK for that : the PCI connector is shifted. I have a photo (from up) : The first is too short and the card will not fit, because there is the hard drive...

The 820-0689-A are too short in the TAM, i have tested.

Hi, i have a question : i have a TAM but i have note the PCI riser.  I search the reference (and the size) frome the original PCI riser for the TAM. I have tried with a "noname" model, but i can't close the TAM with the fat back, and the dual PCI riser from a Power Mac has not the right size. 

Hi, i have a question : i have a TAM but i have note the PCI riser.  I search the reference (and the size) frome the original PCI riser for the TAM. I have tried with a "noname" model, but i can't close the TAM with the fat back, and the dual PCI riser from a Power Mac has not the right size. 

It works with the internal drive too, if you have 3.5 inches floppy with ProDOS on it. And i have tested the FloppyEmu with ".po" image (800 kB) without problem.

Many things, but a specific graphic card : a GXT2000P GPU from a RS/6000 IBM workstation (a machine with OpenFirmware). And... the card works in a Power Mac G3. But there is no driver : Mac OS 9 see a display card, but i have only the white screen boot from the OpenFirmware.