Search results

Is the ArduinoFile not compatible with the 2/10? The internal drive on mine works, but not the Profile drive, which I hooked up with a parallel card I built.

Don’t you need to special order it from the guy or something like that?

This is the ArcaneByte emulator (afaik), it relies on the PocketBeagle which isn't produced anymore.

Does anyone here sell or have files for emulating a ProFile drive for an Apple Lisa? I have a dead Profile 5MB drive i'd like to convert over (doesn't go through full seek) but the two options I know of aren't the most desirable. IDEFile (or whatever) is pretty expensive and afaik isn't the best...

Updating to 4.04 seems to have fixed the problem. Either that or it finally fixed itself after the third OS install.

Anyone know about this crash? I have a LC580 that I swapped a PPC board into (I think a 6200 or 6300? It's 100mhz). Whenever I install Mac OS 8.1 (clean or upgrade), After Dark 4.0 doesn't ever enter sleep mode, and when I force it to sleep, the machine "hangs" (cursor is movable but can't...

I picked up a drawing tablet recently and noticed that my Quadra 950 only has one ADB port, instead of two. This leaves me with a bit of a situation, where I can either use my mouse and keyboard, or the drawing tablet and keyboard, because the drawing tablet doesn't have a passthrough. Are...

https://macintoshgarden.org/apps/powerup-v10 I found this software while going through a Macintosh Portable I bought. Most of the stuff has roughly 2013 dates, with a few exceptions like this file. Does anyone know more about it? It seems to be an early disk defrag / verifier / free space...

Yeah true, I could toss together an image, but was just wondering if there’s a community made one already that people boot from. Or if Apple already has a disk tools floppy that has CD drivers.

For some reason my message didn’t send a few days ago! I’m using an AppleCD 150, original HD, trying to use the Mac Legacy Disk (the one with 7.5.5 or 7.5.3 on it) to boot from, though I could also boot from a floppy cause I just need to install system software.

Does anyone here have a boot disk for the Portable that has CD support? Looking to use my Apple Legacy CD, but the Portable doesn't boot from CD.

Ended up picking these two devices up for cheap! UMAX Powerlook II with UTA-II (transparency?) Wacom Digitizer II (UD-0608-A) Apparently some pens from android tablets will work with this Wacom, just need to pick one out (hopefully find a beige one).

Title says most of what I’m looking for. I’m looking for an era-accurate drawing tablet and scanner (SCSI or otherwise) for a Quadra 950. Preferably something with similar design language. I was originally going to pick up an Apple Onescanner but they seem to be pretty rare, especially...

So I got a 6300CD board from a friend and tossed it into the LC580, and it seems to work perfectly fine, minus the bracket not fitting. Wonder how far I could go with this…

Does anyone here have a spare working ImageWriter IIg board? Would be willing to buy it off you.

I think the controller board is faulty. Sucks cause it’s a IIg, but I’ll have to have someone look over it (already recapped it), and in the meanwhile look for a similar replacement.

So it’s supposedly working fine as it should. However, once it starts up, it goes, runs the paper roller gears (but doesn’t actually latch it to spin the rollers), runs for about 10 seconds, stops; waits 30 seconds, and then repeats. It won’t print anything on the paper from what I can tell; and...

Is the metal rod on this roller supposed to be this loose normally? Wonder if the gear is slipping.

Replacement fuser came in and that did the trick! Now onto two new problems. Number one, paper doesn’t feed in and it throws a paper jam. One of the rollers doesn’t seem to spin even though the gear does (first photo, gray gear). The other problem is that while removing the paper tray it got...

Triac replaced and… no dice. I think the fuser is just bad in some way. I got both 24V and also 120V, so there’s gotta be something wrong with the fuser.