Search results

I also read that adjusting the voltages can be really risky if done incorrectly. (It was something about a potentiometer labeled PP1 and the 5V and 12V rails going out of sync.)  I think replacing every obvious component first, and seeing where that gets you is probably a good idea. I just...

The Diodes and Optocoupler just happen to be parts that commonly fail. Replacements are cheap enough that it is probably worth swapping them all out with new ones, even if the existing components are still mostly working correctly. DP3 and DP4 are called 1N4148 Diodes. These make it so that...

This problem is what I was referring to before.

I have definitely done this before using Basilisk II on a Mac. I am not sure whether or not Mini vMac can do it though. In Basilisk II, you can manually enter a path into the filesystem. Mini vMac usually just uses dragging. I don't think there is a way to access the /dev/ directory on a Mac...

Yes, they should be the same. That was a typo. The iBooks are all IDE compatible.

This is roughly how I set up my Powerbook 1400. I wanted to use System 7.6.1, but only could make 1.44MB floppy disks for my Powerbook. What I ended up doing, was formatting the Compact Flash card using the Powerbook, and then mounting it within Basilisk II on my modern computer. I then was able...

Unfortunately, it would not work. This is a SATA SSD which is incompatible with the iBook G3. An adapter to make this drive fit would be too large for a laptop. The parts I linked retain the proper connectors for IDE, and they will fit inside your computer correctly. The SSD link I sent was for...

This adapter should be exactly the same size as the original hard drive, so there shouldn't be any size concerns. I think they might be referring to another kind of adapter meant for desktop PCs rather than laptops like this one. The connector is 2.5" IDE which should also be compatible with the...

These should be adequate. There are a lot of toxic chemicals on these circuit boards (including lead), so putting them into a dishwasher that cleans things you eat off of doesn't seem like a good idea to me. A lot of people swear by this technique, but it doesn't seem very healthy to me. You...

Not at all. :) I would definitely recommend replacing it with an inexpensive and speedier SSD drive though. Something like this adapter: https://www.amazon.com/mSATA-44pin-Notebook-Laptop-Enclosure/dp/B01GRMUQRG/ref=sr_1_1?dchild=1&keywords=ide+to+msata&qid=1609338268&sr=8-1 and...

This is a tricky problem! I think I would still attempt to remove the PRAM battery, despite the very brittle plastics. There is no absolute guarantee that the plastics will break, or that the battery will leak, but I personally would much rather glue plastics back together than repair a logic...

Neat idea! I think there a few challenges to overcome in order to get this to work. The trickiest one is latency. Part of what makes using a real microscope great is that there is not any delay between moving your hand and seeing it move. Transmitting video data usually adds a delay of a few...

Hello, I am working through recapping my Classic's (630-0525) analog board, and I have another question about component values. DP5 and DP7 both looked very saturated in cap goo (the metal turned green), so I decided to pull them both off of the board. Unfortunately, my Isopropyl alcohol took...

That flyback transformer looks like it has had a very difficult life. The brown glue around the center post started off as a light tan color, but it looks pretty burnt to me at this point. The brass-colored bracket probably needs to be connected for a reason (I think it has to do with...

Can you provide some photographs of the logic board? These would help a lot in diagnosing the problems you are having with it. There is likely some degree of corrosion present on the board, as this is usually what causes the issues you are describing. It may just be hard to spot without some...

It sounds to me like the best thing to do is make a bootable USB drive then. There are several guides and files available online detailing what to do. This link might help: https://apple.stackexchange.com/questions/115120/boot-from-usb-ibook-g4-power-pc

Thanks, everyone! I just placed my (ridiculously large) Digi-Key order. Hopefully, I will be able to bring a few Macintosh Classics back to life in the coming weeks. I'll try to keep this thread updated, as I am sure there will be some troubleshooting in my future.

Hello all, I have a Macintosh Classic Analog board that I am planning to recap, and I am now also the newest owner of four nonfunctional Classic logic boards. I'm trying to put together a shopping cart to order all of the appropriate components, but I am having trouble deciding which parts to...

I'll buzz out that circuit and try swapping the chip out.

I suppose there is nothing at all wrong with buying a copy of Tiger off eBay. You just have to make sure to get a universal version for all the powerpc computers, and not a single machine/Intel version. I suggested it because I can't stand waiting for things to come in the mail. :)