Search results

As part of my ongoing saga with my basket case Color Classic, I took another look at the analog board and saw some burning around DL21 and DL22. At least one did not test right on a meter, so I figure it's easy to just replace them Could those cause my CC to not start up? All it does is make a...

Have u tries different memory? Is the memory resistor selected for the correct amount of memory?

Also, checked the rails to see if there was power, the rails were jumping all over the place. As was said previously, it looks like the PSU isn't going into the on state.

Ok, so I did some reading on an old thread, and I had the analog board out. I removed the metal shield carefully, and reinstalled it. Now, it beeps once and the green light blinks. I currently have it plugged in letting it sit for a couple days to see if it comes up.

The fan does not kick on at all, and no this was a private sale from the Color Classic Club on Facebook  but I did it through paypal

Also thank you for yall's help!

When I stick my ear near the CRT neck on power switch flip, I hear the tube charging, and the chirp almost sounds like it's near the fan but I can't be sure. When I first got the machine,  the ground strap was out of place and occasionally would arc on a regulator heatsink. I have also attached...

So I was recently able to aquire a Color Classic with a 575 board. It was supposedly working when shipped. When I got the machine, nothing. I tried all of the normal troubleshooting steps, let it sit, unplug and replug the logic board with power switch on, clean the contacts. I also pulled the...

Are the through hole caps on an SE/30 logic board plated through hole? If they are, how bad is it in the long run if those came out during recapping it? The computer boots and runs fine, just curious if I messed up, and how bad...

So I finally got most of the stuff I needed to get my Duo running, and I'm trying to move files to it from my 3400. I can't seem to get the DuoDock to go into SCSI disk mode. I'm using the right adapter, no I'd conflicts, but it won't go into disk mode. Any ideas? Thanks!

Well my first Mac project in a while is two fold. I got a great deal on a Duo 230 with the dock. Both work well, except the dock top clips are broken and the slot door is missing. After a trip to Florida for various reasons, it's all up here with me in NC and I can finally get started.  While...

So I managed to score a great deal on a working Duo 230 and DuoDock! Just missing the ball and Retaining ring(which I'm hoping some kind soul on here might happen to have a spare btw lol) I have been dying to get one of these for many uears!nd, and get it up and running on my desk. (Of which I...

I would like to be counted into this beta testing of awesomeness, as long as the site has some FEETS!!!

I am actually! I'm dying to play with this machine.

Ok so I just got a good look at the contacts on the keyboard, there is almost nothing left of the metal connections. Does anybody have a spare 3400c keyboard?

Settles it. I need one.

No. What I would like to know is can I use a standard usb kvm. Usually it has a built in hub and only provides usb keyboard and mouse over one usb cable. Like if I wanted to integrate an adb mac, say a Quadra 700, into my existing kvm setup. Thanks!

Hell yea id buy one!

Ooo. So...how about in a KVM configuration?!

Only way I can think of to do this is to create a System 7.5.3 boot floppy set. Or get a disk tools floppy, plug the whole mess into the se/30 and see if maybe you can see the filesystem. if you can, then you can use lido on the mac itself, write the drivers, and make sure the system folder is...