Search results

I’d like to know as well (G5431).

I like to follow this thread :-)  

I use a SanDisk Extreme PLUS 32GB, Micro SDHC.

This is what happened last night. I re-formatted all the ’SCSI2SD disks’, four of them in total and 2GB each, with FWB HDT 2.0.6. Then I switched to the JackHammer. At first, nothing happened, grey screen with the mouse pointer. I removed two Digidesign cards, and the system would start. I then...

Definitely, thanks! Which Nubus slot do you use for the Hammer? How many drives do you emulate? And how do you terminate the SCSI2SD v6 together with the Hammer? Have you done something extra with the SCSI2SD utility? I’m gonna try it again and upgrade the drives with FWB Toolkit. Externally...

Well, I switched to a SCSI2SD 5.1 it worked for a while, but it lowered the performance further until I switched to 32-bit memory and started to get bus errors at startup. I also tried them in two different IIci:s, with and without a Turbo 601 and SCSI 4.3 activated, with varied results...

I’m currently testing two identical JackHammer cards (3.2) to see in what condition they are. But I’m not sure if my set up is optimal. I thought an IIfx would be a decent candidate to test them with, but I’m not getting any increased performance (I get approximately 1,15 MB/sec R/W with a...

Good looking schematics! (to at least a laymen like myself). Your revitalizing work with the Quadra 900/950 PSU makes me want to pursue my quest for a Quadra 9XX even harder than before! Thank you! :-)

Nice! I’m also very interested. Put me down for two of the IIcx version when it’s ready.

SuperMac Spectrum Power•1152 graphics card with weird red artefacts (the HD icon labels) that appear after being connected to an AppleColor High-Resolution RGB Monitor for 5–10 min. (The card works great with an Apple Studio Display.) Sound familiar?

I love monologues (and the effort of course)! And better yet, the day I get hold of Quadra 900/950 this will be gold! Keep it up!

Thank you @AwkwardPotato That is the best guess so far. 

That did it! Now, for the first time ever, I can print from system 7.1 to my OKI C841! Thank you so much! By enabling the EtherTalk protocol in the printer menu /Admin/Network Setup/EtherTalk) everything works like a charm! I have always assumed EtherTalk was active since it was listed together...

This sounds interesting! I have an Oki C841 that I have been trying to hook up, but never made it.

The video suddenly became raggedy and stripy in right edges of windows, menus, and other GUI elements (only when displaying millions of colours). Upon closer inspection, I found a blown ceramic capacitor on the back of the card. I thought I replace it, but I don‘t know the value, or where to...

I have never heard that sound from a PPC, sounds like something went really wrong!?

This would be a perfect opportunity for 68k genius to figure it out (I have a Turbo 601 and extra SE/30 standing by for that day).

Sweet! Thank you @Bolle ! And nice feature regarding the detachable AUI port! I will put it to good use the day I figure out how to fit my Rasterops card on top of the TwinSpark/Daystar/MacCon configuration.  ;)

Picked this daughterboard up, to use it with my MacCon IIsi/SE30 ethernet card, in the hope I could skip the use of a transceiver since my currently installed daughterboard only has thick and thin connections. Question is, are they compatible?

Sounds interesting! I’m currently testing different graphics/music software with system 6.0.7, 7.1, 7.5.3 and 7.6.1.