Search results

Wow, extremely nice find =) Boxed!

Very much possible, i have 3x 5120 that are acting weird and up for new hybrid http://jcm-1.com has them in stock nowadays, thats great

Yeah, it really takes some soaking sometimes and then even 3 times, dont know what crud is dislodged with that

Wash it Some extra times Sometimes I have to wash 2-3x First hot soapy water and nailbrush Then alcohol bath 99% 4-8hr

GAAF!

i had this and it was a via in the corner where the interrupt are.. where the hybrid is on a 5120;)

I always find the portable BOG slow in comparison with 8mhz SE, which I dont understand

16MB, Portable, geez thats.. AWESOME!! If there is any plans to sell them, i'll take probably 4

i have 8 portables and the 5120 are pretty finicky

I have another question 😆 Would this fit a 128k logic board 630-0101? Second question: I have a 128k board with a defective RAM IC, would this board bypass the built in RAM?

Also preparing to build this Anyone just used an ATX PSU (i want to use only the GaN HDPlex 250w, no Pico)? Anybody got a good part number for the 3 pin molex connector and a fitting interlock switch? I want to keep the original PSU board original and not take parts off =)

I tried this today, 601 card in Quadra 700 with 800 board @ 40Mhz Norton says 80Mhz, everything seems to work but i have three vertical lines. First i thought too slow VRAM, but also 70ns in the slots doesn't work. On-board is 80ns...

Like these: https://ebay.us/m/MdBIog Have 20MHz now and running great, but always looking for that extra Mhz RAM timing resistor mod done 21.6Mhz i cannot source unfortunately...

also interested.. i am thinking of using dove macsnap clips (do they call these 'killy' also?) but i only have 1 dove macsnap and 10 ordered pcbs' ;)

I'm also curious if it would work without the 'Plus' ROMS or rominator, so with -B or even -A ROMs I also received the PCB's =)

Oh that is interesting No, I never touched advanced 😝 Will try and post results

That is interesting as I benched the 43mhz non-diimo as faster then 38mhz with diimo

Thanks=) i am going to use: 10uf tantalum polymer https://nl.mouser.com/ProductDetail/KYOCERA-AVX/TCJC106M035R0200?qs=vwb%2FlAd%252BdciaIpEa2kEjcw%3D%3D I do not use yellow tantalum anymore since i saw a capacitor burn like a match on a SE/30 board Addendum for the mouser cart: correct JST...

Is it correct i have a empty space at C1?