Search results

  1. Juror22

    Repaired a Quantum 40 S full height drive with a stuck parked head!

    I'm glad that you found this, because my searching, absolutely failed to turn this up! So thanks for figuring it out and reporting back - I have this in my cart already. If for no other reason than I have to get some of my own, so I can decipher the messages imprinted on the tape... ( ...you...
  2. Juror22

    Repaired a Quantum 40 S full height drive with a stuck parked head!

    So you wrapped and sealed the bumper with this - It looks excellent, and since it works that's even better! Which brand of tape did you use (3M Temflex?, WarriorWrap? something else? Could you share a product number if you have it?
  3. Juror22

    Is there a way to turn the monitor off, but leave the logic board active on my SE/30?

    With all of the work that Bolle et al have done on the SE/30 recreation, grayscale, expansion cards, etc, there has to be something they have come across that would allow a safe circuit hack to be inserted at the hardware level, or maybe even a software bodge for this? Maybe a thought on the...
  4. Juror22

    Levco MonsterMac with SCSI and lots of dirt

    I've got the Marx brothers as well - I think I've seen the Dwarfs on earlier boards(?), but I also thought that I should mention that the 512 board that mine was attached to had a bad (leaky) axial cap, which I still need to make time to fix.
  5. Juror22

    APS DaTerm Digital Active Termination drive

    Possible, or it was cheaper, since it used less copper?
  6. Juror22

    Mac LCIII upgrade with 475 board installation...floppy drive question

    You folks are a real bad influence on me! I thought this was way too good an idea not to try out, so now I own an original LC that I have just successfully, recapped, but since it missed my flurry of retrobriting this summer, I may have to try out one of the indoor alternatives.
  7. Juror22

    Levco MonsterMac with SCSI and lots of dirt

    That's what I found with mine - no zany startup, and the MonsterMac just worked, providing the additional memory. I have a revision 'D' board with the same revision ROMS and I suspect that only early revisions of the board/ROMS had the fun startup and that it was cleansed from the later...
  8. Juror22

    scsi2sd-util not finding my device

    I owe a thanks to @dochilli for bringing this back and having me take another look. ...and it turns out I couldn't just let it go, and I really tried for a couple days, but that and the combination of taking another look at my settings, uncovered a couple of issues. I had taken a backup before...
  9. Juror22

    Cracking open some old ones

    First, I would try a search in the forums for re-capping help (or recapping help) (recapping assistance) something like that to find links that can help (you may have already done that or may be in the process and be overwhelmed, but if not...) And here are a few to get you started: This is for...
  10. Juror22

    scsi2sd-util not finding my device

    I was in that thread early on, and probably the only one that fully documented what every single page on my scsi2sd setting was (everyone else would show one, or two pages at most) - so I never found out how the ones that worked maybe differed in their ending blocks and I was very frustrated at...
  11. Juror22

    Mac LCIII upgrade with 475 board installation...floppy drive question

    Thanks, I know I could have just tried it out, but I'd hoped some brave soul had already tested the waters. Now that is cool - next thing I'll look into once I dig my full 040 chip out of storage!
  12. Juror22

    Mac LCIII upgrade with 475 board installation...floppy drive question

    I've gotten a 475 board and would like to just drop it into my LCIII case as an upgrade (of course that leaves me with two spare LCIII boards, but that's a problem for later). If I do that, will it work with the LCIII's floppy drive? I don't think I can change the superdrive out for the manual...
  13. Juror22

    So, this is cool:)

    Simply, incredibly, awesome. Congrats!
  14. Juror22

    IIci too much memory...

    Now that's a fun feature! And its always great to learn more about where some of these items originated.
  15. Juror22

    IIci too much memory...

    I wish! :) I have been watching, but not for that long... so I have not seen a good price on one. There could could have been some at VCF midwest and I wouldn't have known - I didn't get to spend very much time there, just happy that I got to go and get a few items, I'll try to plan a bit...
  16. Juror22

    IIci too much memory...

    I am going to try the key command and report back, is there a link for the replacement ROM for this?
  17. Juror22

    IIci too much memory...

    I have been tying to take better care of my II's this past few months and this weekend I caught up with on of my two IIci's, which originally came to me with a packed Toby card, as well as ethernet, cache and GPIB cards (but and no hard drive). I had recapped this one in the not-too-distant...
  18. Juror22

    scsi2sd-util not finding my device

    And I am here too (a few years later) and I know I'm not the only one, from back from when it was the only game in town (almost- remember the Aztec Monster-CF SCSI adapters?, I have some of those too!) and I need add a few notes that future agent_js03, myself and others, might find useful...
  19. Juror22

    OMG - I cannot get that tune out of my head! 🤪

    OMG - I cannot get that tune out of my head! 🤪
  20. Juror22

    Quadra 950 Key barrel

    Remove it and take it to a locksmith? They may be able to re-key it. (the service source shows the barrel removed in an exploded view, but doesn't explain how!) I know it may not be the ultra-low budget route we usually take here, but sometimes the neighborhood shop will surprise you.
Back
Top