Search results

Hello Soldiers, It's time to march to the beat of the only drum I have. Why? Because I am having issues with MIDIGRAPHY. I cannot find any other instruments than what is preset on MIDIGRAPHY. I have tried running this program on an LC II with system 7.5.5, Quicktime and Quicktime Musical...

Update: Correction... there are no collisions when pinging either from the 192.168.1.100 to ...1, ...199, or ...200. at the time I am writing this .200 (G3bronze) is connected to the 10 Base-T network. I am begining to wonder if the error is originating the airport express router. The Mini...

Leographix wrote "...I can´t even ping the Plus´adress..." hmm. Does this apply also to your PowerBook 145b? I will soon receive an ethernet card for my performa (LC) 475. I will have it up and running (I hope) and will test to see if I can ping between it and the PB145. "...If these Macs...

Wow, quite a lot to absorb. 1) I will ONLY work on the Powerbook 145 connectivity problems right now. My Plus is a "future" project. 2) a) The MINI EN/SC-10T SCSI address is physically set to '2', NOT '6'. There is a Dial inset where one can observe the setting. I must assume that the...

Update. I have purchased a Dlink 10/100/1000Base-T Switch. It is downstream from the Airport Extreme Router (192.168.1.1) and upstream from the Linksys ew5hub hub. I still have no luck.

I think the absence of a 10/100/and/or1000Base-T switch may be causing the issue, as Leographix already stated. I have removed the HD40 from the SCSI Chain. Mini EN/SC 10T Termination may be turned on or off. It is ambiguous. The back side of the EN/SC has a hole with 2 dip switches. Link...

I am under the assumption that the MAC address is a hardware encoded address. I only have 1 EN/SC right now and they're now geting quite expensive to buy on ebay. So If it is a hardware encoded address, it would not change... Just write the address down for future use... I have a Plus, SE...

Would the switch described below be suitable? http://edmonton.en.craigslist.ca/sys/831318465.html Also, your last post confirmed the my original question. that holding the option key down when clicking "built in ethernet" would generate the MAC address. "This is no wonder and not Your fault...

couple of errors in my last post 1) pb180 should be 145b (its late and I'm really tired). 2) more of a question... Where should the 10 base-t hub reside? Just downstream of the modem (thus the whole network would run at no more that 10 base-t), or downstream of the Airport Extreme Router...

Leographix (J) wrote: "Consider to get yourself a 10 MBps hub (no switch and not faster than 10 MBps)!" I have one. An old Lynksys 5 port hub. "On most adapter cases a little bar code sticker showed a combination of letters and numbers that represented the MAC adress." Ultimately my router...

Hi all, I am interested to know how to determine the MAC address for an Asante 10T Mini EN/SC. I am currently trying this device on a Powerbook 145 with a my Plus' HD40 external drive attached in the SCSI chain. My Powerbook 145 is running System 7.1. I have installed MacTCP 2.0.6 and...