Search results

After 10 years with retro Macintosh gaming, the time has come to put also my dos computer on my office. On the dos pc i have a 15" sony trinitron monitor and on my Macintosh Performa 6116 i have the Macintosh Color Display Monitor M1212. I can say that the quality of the graphics of most mac...

Do you know where i can find one sticker like that? My Performa 6116 has the sonnet g3 500mhz.

I remember for the connection to the Performa 6116, Bunsen was really helped me.

Thank you cheesestraws. You were all really helpful. I bought the Roland MT32 in 2010 with my Performa 6116 and it was so difficult for me to make it work because i am not familiar with sound stuff but i made it. I have the LC475 since 2017  and it is better to use Roland with it because most of...

Here is the setup. Nedis audio mixer with three input sources connected with the suitable cables with the Macintosh LC475, Roland MT32 and the Apple external 4x cd rom drive. All work perfectly, i adjust the sound balance via the mixer which also does the job of an amplifier i guess because the...

I found what it happens. When i have the 3.5mm cable full connected in the adapter then the sound comes only from one speaker. I tested with one more set of speakers and i had the same problem. I tried to connect the 3.5mm jack having it little outside, not complete connection in the adapter and...

I will give it a try. The Logitech x230 speakers play normally directly connected to the sound port of the Macintosh LC475. Sound from both speakers. Also the same from one cheap of speakers I had recently. I will try later a set of headphones. 

I've just tested the amplifier with the Roland MT32 and the sound is coming from both speakers. Great quality and so much louder. Only from my Mac computer the sound is coming only from one speaker. All tests with cheap adapters

Cheesestraws, the truth is that all the 3.5mm female - 1/4" male adapters that i have are the cheapest - lowest quality. Maybe i need something like that ...

At the sound out panel there are permanently on the following options which cannot be changed: Rate: 22.254 Khz Size: 8 bit Use: Stereo At the sound in panel there is nothing to choose.

You mean the 3.5mm female - 1/4" male adaptor? Regarding the cables i have two of them, one cheap low quality and the other is a clicktronic cable.

Today i got a mini stereo amplifier, the Behringer HA400 which has one 1/4" input port and four 1/4" output ports. I tested it with my external 4x apple cd drive with music cds and games that play music directly from the cd and i also tested it with the Macintosh LC475 computer. Below the...

I like what you have done. Very nice job. I haven't used my Roland MT32 via programs like Munt or Dosbox. I have used it with success on my Performa 6116, Power Macintosh G3 Minitower and now with the big help of this forum on my Macintosh LC475. These days i am looking for an audio mixer in...

I would like to thank you all again for the helpful info. I haven't still completed my sound system but I am happy that the Roland runs perfectly. The day before yesterday I was playing Freddy Pharkas. I need the Roland for my LC475 because on my PowerPC systems  (Performa 6116 and Power...

Hello, today i tried the following on my Macintosh LC475. I connected one cheap pair of speakers in the computer's sound port and then i connected my logitech X230 speakers in the phone jack's port of the cheap speakers. So the sound was coming from the logitech speakers and it was a lot...

Thank you all for your answers. Today i got one pair of speakers (very cheap, very bad quality, i had bought them years before in order to adjust the volume on my powerbook 540c) that i had in my basement and i connected them to Roland. The logitech speakers are still connected on my Macintosh...

Thank you Cheesestraws for the helpful answers. I am trying to find some free time for my investigation but it is difficult with two small kids.

Thank you commodorejohn for the info.  Cheesestraws, is there a big difference between a mono mixer and a stereo mixer?

Thank you for your answers. I will check sometime the video card to see how much memory there is. Maybe this has to do with the graphic smoothing of some of the Lucasarts adventure games (Day of the Tentacle, Sam and Max Hit the Road, The Dig) where there is not an option for graphics smoothing...

Cheesestraws,  what type of cables do I need for the connection of the mixer with the computer and the cd rom drive? Also,  back of the Apple external scsi cd rim drive there are two ports  (L and R). What are these for?