Search results

I use them in both of my SE/30s without any Asante software. Do you need to pull the Math coprocessor chip in order for it to work?

Very interesting. Were you able to get the Turbo 040 to run with the Micron Xceed card?

Thanks all for the input. The cleaning I have done thus far has been mostly elbow grease... The tins were also coated in WD40 so I filled the utility sink with hot water and Dawn dish detergent. I scrubbed with various plastic and wire brushes while submerged. This kept the dust down. After...

Yeah, I was pretty appalled at the state of this when it arrived. What is odd is that the top of the case was way worse. Perhaps it was off and there was some flooding... Anyway, the previous owner tried spraying the inside with wd-40 which had no effect. I have run out of weekend so I will...

HI All, I won an auction for a IIfx earlier this year and I have these threads going on its motherboard & PS which have now taken back seat to its case. The auction (which I was not expecting to win) pictures only hinted at its internal mess: I removed the internal tins and they were a...

This is the Apple Fritter thread I started this effort in. While it has a ton of missing image links, if you scroll far enough down you will see that this could possibly fit under the bottom of the CRT. I think you'd be more likely to run into the floppy drive... Here is one of the images from...

Good to hear.  Do you have a right angle PDS adapter was well?  If so, give this a try with the motherboard on the bench: Connect Asante to the motherboard Connect your right angle adapter to the Asante, I think at this point the female PDS will be pointing up Insert the right angle PDS...

@pcamen Do you have a Daystar accelerator and IIsi adapter for the accelerator?  How about and Asante NIC?

I have not opened the IIfx PS as this is relatively new to me and I don't know if it has been.  I will crack it open today if time allows. As to the tester, it is not a top-shelf model but has served fine on my replacements for SE/30, IIsi and IIci power supplies with SeaSonic PS as recapping...

Hi All, The IIfx is in queue and I am trying to find out if my power supply is putting out proper voltage.  I have one board that will start the PS and when I test it I get: 5 Reds: 5.13 1 Yellow: 12.14 1 Blue: -12.11 1 White: 4.23 Is anything off here?   THx!

THis auction ended Newer Technology Macintosh IIfx series clock upgrade. (80,90,100 Mhz) A Newer Technology Apple Macintosh IIfx processor clock upgrade card. It pushes in the to processor slot and then the processor pushes in to the upgrade card and is clipped to the two of the processor...

Lubuntu 17.10 I started with this and have not updated it as I don't want anything to break Netatalk 2.2.6 You are correct, Netatalk 3.0 dropped support for old Macs so I went with the last 2.x available.  Running this didn't work with OS X so I added Samba. Samba 2:4.6.7 -- not sure if that...

Have a look here: While I don't have a RPi or SD image, I do have netatalk running on Lubuntu and all of my macs running OS 6-9 can connect to it.

Here is my update... Board 1 got a working IIfx ROM installed and when powered on, no chime or video. I checked the PS and got: 5 Reds: 5.13 1 Yellow: 12.14 1 Blue: -12.11 1 White: 4.23 For fun I moved the outermost NuBus slot to the innermost slot and no joy. Any other suggestions on...

It was the best of times, it was the worst of times... Years ago I got this board for the IIfx ROM in one of my SE/30's. It was only the board and I didn't know if it worked. I'll refer to this as Board 1.  I wanted get this running so I bought a complete non-working IIfx earlier this...

I have never played with A/UX. Is it possible to have it on a partition on the same drive running other version of 6 and 7?

@Udo.Keller thanks much for this and the link to the *.pDF manual....that is gold!  Since my OP I have acquired a IIfx so I'll see if I can get this running when time allows.

Do you have the IIsi adapter for that 601?

I have never seen these so I am added the photos form the action that ended:

Hi All, Has anyone tried to 3D print feet for your IIci?  When I got mine it had none and they appear to be hard to find...  This seller sold his/her last set...