Search results

I found a apple 5pin din to apb and wondered if i could hook up a apb to usb to connect a keyboard to it

When ever my apple iie boots, it shows this screen. It still will boot to basic but it wont load from floppy.    picture- https://drive.google.com/file/d/0B4V3gGoWJ8VwUnBTbldfekloWFE/view?usp=sharing

I am bootstrapping to a apple IIc, I can rule out the floppy disk because i have tried a lot of different disk, It could be the floppy drive, but I have no boot disk to test, and im not for shure that the disk image is valid, Is there a know valid one i could try?

It keeps putting x's there

Whenever i try to recieve a disk image from adt pro, it keeps writing "bad blocks"

Any suggestions?

I just got a new disk II for my IIc since its internal drive was broken, and whenever i use adt pro, it keeps writing "bad blocks". The disk II also doesn't sound as load as it should. P.S. Wont be able to respond till sunday

I don't know if this is the best way, but delete all the files off the drive and then add a system folder from a boot disk. Then locate the system folder in the system tools, utility disk, and printing tools disk and copy the contents onto the hard drive. (before you do this i would wait for...

Yah, my internal floppy drive doesn't work. When i use adt, it keeps writing "bad blocks"

If i were to unplug the internal drive and plug in a disk II, could i use the disk II as if it were the internal drive?

I finnaly found out it was writing all of the data as "bad blocks"

Is it possible that the floppy drives bad?

Ok, i changed the com port rate and i got it to transfer but it said "complete - with errors!" And the disk won't boot after wards. I looked at trace and it said it transferred with 1 error but how do i find that error out?

Also, after i format the disk its name will be "no name' instead of what i put.

OK i tryed it again and it said it aborted again!!! But this time id did a trace!! This is what it said before it aborted... 1/20/05 3:15:29 AMSerialTransport.pushBuffer() exit. 1/20/05 3:15:29 AM CommsThread.sendPacket() calculated CRC: 0 1/20/05 3:15:29 AM CommsThread.waitForData(two bytes)...

Im using dsdd

yes, using adt

Ok, I got to transfer a image, but the hist says there were errors. When ever i try to boot from disk, it doesn't work

Whenever i try to transfer a disk image from my host computer to the 2c, the host says the image transfer was aborted. How could i fix this?

Oh yah, i tried to replace the ram with soldering it in the board ( not piggybacking) and it gave me error 0f0008 (I think that's what it said, it was hard to read) What does that mean?