Search results

Actually, i can force 640x480 @ 66 with SwitchresX, it's not the problem. The problem is the sync : i see the image "scrolling" when i use the correct timing.

Hi,  I have a little problem. I have found a 12" monochrome monitor (High Res) and i will try to connect the display to a modern Mac. And it will not work : https://www.journaldulapin.com/2018/08/17/crt-apple/  The display is working with an old Mac LC, with a Power Mac G3 (beige), but not...

The solder pad is for a ROM slot, not for a RAM slot.

Hi,  I have a question : i have two QuickDraw 3D Card from Apple, and i want to test the card with QuickDraw 3D benchmark. And for that, i search CineBench 2000 for Mac. The file on archive.org is corrupted, and i can't find a copy. Can you help me ? Actually, i have tested one card with Havoc...

Hi. It's old, but i have found a GM ROM with 8 chip, and i have dumped the content : http://down.dandu.be/ROMb With this ROM, i can boot the Pippin from an hard drive.

The ZV Ports is also used for the MPEG2 card for PowerBook G3.

I have found the information into the LPX-040 motherboard developer note : https://web.archive.org/web/20030410054223/http://developer.apple.com/techpubs/hardware/Developer_Notes/Macintosh_CPUs-PPC_Desktop/LPX-40_Dev_Note.pdf The Cudla Lite is on the clone logic board and on Power Mac 4400...

Is this possible tu dump and recreate a CUDA Lite chip ? It would be fun to add PS/2 Mouse and Keyboard on a Mac. I thunk it's the same chip, but with more memory and code inside the firmware to handle PS/2 peripherals. On the Mac side, the Power Mac 4400 use this chip, but without the...

I have one like that, but my model is an USB mouse, with an ADB adapter : https://www.journaldulapin.com/2017/04/12/optical-usb-adb/

Mac OS X is not writing to HFS since many years. Actually, there is no reliable solution. At home, i use a Raspberry Pi with A2server as a "proxy" : old Mac and modern Mac can write and read on it.

It works with Floppy Emu : https://www.journaldulapin.com/2018/02/24/apple-iie-card/ Actually, it works too with the internal floppy disk, without problems. The size of the disk image is a little problem : if the disk image is not the exact size (800 KB or 140 KB), the Floppy Emu will not see...

It's very complicated to find a LCD (or even a CRT) who accept Sync On Green. A home, i have many display, and the only way to have an image is my acquisition card.

This one (in the center)

I have tried a PowerPC 604 from an IBM machine on my G3 BW : it will not boot, with a long beep. 

Actually, the Mac PB is an LocalTalk to EtherTalk adapter, but he can draw power from ADB (or external adapter). Many Farallon adapter are faster than "normal" adapter : with an external quartz, it's possible to speed up the connexion to ~1 Mb/s (only ~230 kb/s with Localtalk). But only with...

I'm not sure with this specific adapter, but i have a Microtech XpressSCSI USB to SCSI adapter and it works without driver or with driver. Without driver, i can connect one SCSI storage peripheral (just use ID0) and it works as a USB Mass Storage driver. With driver (for old OS like Mac OS 9...

You can use a Jamport : it's a peripheral like the Stealth Port. http://alexhixon.com/projects/jamport/ The adapter replace the modem to add one serial port. It works with MIDI.

I will try that. I have one, but not the power supply, but with the information, i suppose i can adapt one.

You can't use the Fat Back with a dual PCI riser, i have tried that (and failed). With the Fat back, you must use the CommSlot riser and the right PCI riser (i have not found a model with the good size)

It's my website I like the Pippin, and i have many things about this console ! Actually, i have a modded console with hard drive, better CD drive 24x), memory and the floppy drive. The next things is to build a PCI adapter