Search results

i reset the PMU on the other mobo and it was to no avail. I think that the motherboard is dead. I did all of the things in the manual. bummer man.

Hey thanks, I will try that out. As far as one of them goes, I am sure the mobo is toasted. It has a burn mark on it on the bottom where there is an visible break with solder joins around a chip. It looks almost as if there was an explosion under the chip! I hope it is a power button or a...

well i am pretty sure that the power supplies are good. I havnt found an apple service manual and have actually never heard of those. I think my next step is to pop out the mobo and inspect for broken solders joints and shorts. I will keep you updated.

I have two mac minis, both are G4. When i plug one in, the fan just turns on. The other one does nothing when plugged in or when the power button is pressed. Any ideas what could be wrong?

macsales.com sells the 16mb chips. They are $9 a piece, which isnt the cheapest, but there isnt any bidding and you know that they will be good

i have a IIcx with a 68LC040 accelerator in it. 25Mhz woo hoo!

how do i check what revision this is?

it is a powerforce that you adjust the speed using cpu director. the jumper settings arent supposed to matter. This leads me to think that it is an open firmware problem. I tried experimenting with jumper settings. If i clock the 350 mhz down to 266 mhz on a 67 mhz bus it will not boot...

I have a powerlogix powerforce g3 and my computer wont boot with it installed. It still boots with the orignal processor. The powerlogix was previously installed into a beige g3 and another B&W, but running bus speeds of 67mhz. Mine is running at the full 100 which is why I want to use...

I just got a blue and white g3 to replace my beige. I want to put my sonnet accelerator into the b&w, but whenever I clock the bus down, it will not boot. I would just keep the beige as my main machine, but the video is wayyyy to slow and the b&w doubles almost all of the video...

i took a look at her activity monitor and there were three launchd processes open, but none of them were using any memory or processor time. Is there any way that i can check to see if a process has an attached file? Also I was unable to find a music file, but that just means it isn't labeled...

It only happens once ever couple of weeks which makes it so hard to find out. I don't think it is serious if it is a virus because it will mute with the computer. The only way she was able to make it stop was to restart the entire 'Book.

hahaha we already confrimed that isn't itunes lolololol but i dont thing there is anything wrong with it. none the less, she isnt a fan...

Hey, my sisters room mate came to me with her laptop telling me that it plays an elevator version of jump by van halen randomly. I couldn't find anything on google about it and don't know what to tell her. anyways i told her to get a list of all the processes while the song is playing. i...

now that i think about it, I am probably wrong because i seem to remember it being a bug with xpostfacto

you would have to use os 9 because it is disabled in osx

I seem to remembrer something about a 2GB limit. Could I format the drive in os 9?

Can I just put any old scsi hard drive in here? the 20Mb one is dead and I am forced to boot from floppies.

The 66 mhz slot should not effect it. If the card can fit into the slot normally, then it is rated for that speed. Are there any broken or loose solders on the VGA connector? I have had that happen to me on an old card once after swapping it. Sounds like you need a new video card.

I have 120GB in my Lombard and my sister's Pismo has a 40GB yanked from a mac Mini. Both are PC compatible drives.