Search results

I scored four NuBus cards in an IIfx, and one of them was the Thunder IV GX 1360!  The IIfx was sold as untested, and still, it works like a charm, even with the original 160 MB Seagate! Thank you @Bolle for helping me out identifying the cards!

You said it! :-)   Yes, it would be nice to get it started. I’ll keep my fingers crossed its salvageable by a simple cleaning and a re-cap. Does anyone know if the PRAM battery is soldered on directly the board?

Radius Thunder IV, sweet! Thank you @Bolle good eyes (as always!). I’ll post some new pictures of every card on closer inspection.

I bought an IIfx yesterday, probably none-working since the ad stated untested. What caught my interest was the Nubus cards, in this case, four of them. So far I have roughly identified three of them, I think, as one Ultra-wide SCSI controller card and two graphics card, but the fourth one was...

Super! Nothing better to match your profoundly gorgeous clear case!

Wow! I’ll be needing at least two these! 

Thank you @netfreak very helpful! I’ll order the same set from Digikey. Did you keep the old 2uF cap in place?

Please update, and show me how you made them fit :-)  

I’ll check it out, thanks!

Hello! I having trouble finding the right film capacitor replacement for an IIci Astec PSU, especially the large 2.0 µF 250 VAC. My local supplier doesn’t have them, so I thought I use Mouser for this order or any other suggestion for that matter. This is the entire capacitor list (red shows...

Thank you @Trash80toHP_Mini! It is about time finished it. :-)

It has been a while, and I have almost forgotten about the project. I made some wrong calculations regarding the mounting, so I have to do some filing and fiddling. The kick-stand was too advanced and expensive for me at this point, since this is my first print-out ever. But here are some...

I have checked the wire, it is no touching the via, but there were som tiny solder residues between the legs of 74HC74D and HC132A, however, removing them didn't change anything. I’m gonna check your markings thoroughly. :-)   Good eyes @Bolle! Here some more pictures.

Hard for me to say. I think it works after I made a little extension lead replacing the pad. It might as well be wonky. I’ll post a close-up tonight.

A morning update. 1. C133 fixed (small ceramic cap on the flip side had broken off). 2. The C10 plus-pad was ripped!!! I suspect this could be the reason for the floppy to behave strangely? I made a half-assed attempt to fix this, but with no luck. I would love some suggestion on this one! 3...

Thank you @Bolle this is new territory for me!

I might add that I have yet to replace the large caps since they Looked okay. I’ll start with replacing those.

I see, how can I test it?

I’m having a problem with a motherboard that has have been recently re-capped. First thing, the IIci behaves like a compact mac when turning off. Second, the floppy drive is recognised as an 800K drive, it won’t boot, and can’t format disks. Sound only works through the headphone jack. SCSI...

Do you have any news regarding your speaker problem? I have the same issue with an IIci.