Search results

As most of you are aware the posts for that little hat at the top of the sub for the TAM break almost certainly when you go to recap or repair them. As such I've designed these little post fusers that allow the two pieces to join as they should. They were designed with the intention to have just...

Hello everyone, I've finally got around to finishing this guide. I hope it comes in handy and helps someone out.

Hello everyone, A while back my good friend @Jockelill picked up this SE 1/40 for me and sent it over to the United States from Sweden. If some of you were unaware the SE 1/40 as far as I can tell is a model designated only of the European market. It is essentially a Macintosh SE FDHD with a...

Dropping this here for simplicity sake. Basically this chart outlines the differences in components between a Power Macintosh 6500 logic board and a Twentieth Anniversary Macintosh logic board. This is hand especially to Twentieth Anniversary Macintosh owners because if you have a faulty board...

Hello everyone, I've been doing a lot of studying up on the Power Macintosh 6500 and Twentieth Anniversary Macintosh logic boards. I own both machines and was curious what needed to be added, removed, or moved in general to make a Power Macintosh 6500 logic board work in place of a Twentieth...

Hey everyone I thought this guide I made might come in handy for anyone recapping their TAM logic board. Mine was experiencing a strange issue with the screen being glitchy and inconsistent and a logic board recap fixed it for me. I would like to leave a tip to anyone pursuing this recap, if you...

This should also work on LC520, 550, 575, and Macintosh TV, and probably an even longer list of random Macs. This started as a few different premade models that I merged around until I was at a point where I was happy with it. Thingiverse Link Here

I have had this Bell and Howell Apple ii Plus for a bit now and it’s in almost immaculate condition. However I have some questions. To begin there is no raised power LED or backpack and the serial number is very, very low. Is this some rarer variant or what’s going on here because I was always...

Hey everyone happily got this SE 1/40 and I'm having some difficulties identifying the following components due to damage, corrosion, and well frankly just not looking nice. Aside from the chips and resistor packs (thank you @obsolete for that mass order of those packs), can anyone help me...

So I have this Mac Mini and if I recall I saw a codename somewhere on it starting with a Qxx. The computer boots up to this weird OS i've never seen before, it seems very limited with a lot missing. Holding any number of key combinations won't do anything as it simply ignores them and boots into...

I've been slowly discovering a lot about the G4 Cube which in my opinion is one of the best looking Mac's Apple ever made. After looking for one for a while my good friend @Jockelill gave me a great deal on one and I've been loving the device a whole lot since receiving it. I've slowly...

Hey everyone I made a recap guide for the STB. This guide is for the STB3 (not the much rarer STB1) but I also decided to make a teardown guide on fixit in case some of you are a little uncomfortable trying to see how to disassemble this device. I also wanted to clear up a common myth or two...

If you have a 1.2 Amp Lisa Power Supply there's finally a published List now.

Hey everyone thought I'd make this list and share it with everyone. I know there has been a post about the logic board recap guide HERE , Thank you to @shadedream for that! And before you ask yes, the Beige PowerMacintosh G3 and the PowerMacintosh G3 All In One share the same logic board...

So I got this Disk ii drive looks very nice but has no serial number, markings (except on outside), and no textured paint. Yet somehow this uses a correct Shugart Mechanism (Shugart Associates) yet what’s odd is Apple usually covered that up. I’ve seen older Apple PCBs in this color some...

Hope these help someone forget where I found them but know it was a while back. In any case at least they are here now if anybody wants them.

So I recently got this little guy and I have no idea what is, what it was meant for, or what it does. I’m thinking it’s from 2003 hence the -03?

Hey everyone, I’m trying to solve two current issues. I’d like to find the board edge connector for the Color Classic and the connector that the board slots/slides into. I’m almost positive you’d have to combine a few modern day connectors to make one but I was curious if anyone has a link or...

Hey everyone, thought it was about time someone upload the Apple TechStep Guides and Documentation. That being said here's what I have, enjoy. Brief Description, and download link is below the images. "This is a collection of documentation that came with the Apple TechStep. This includes the...