Search results

This SE got battery bombed. Soaked the board in vinegar for 2 hours and in ipa for a while. Also scrubbed it with ipa and a toothbrush. During the cleaning, a rtc fell off. Attached photos. Any ideas on what to do? Beginner at this and looking for some advice. Using a standard SE with a working...

Will take a look at the chips and caps. I have been using a rom simm, it’s just not in the photo. The Jumper itself broke.

Screen is pink when holding down reset. Here are some photos

Thread Necromancy! Since the last time I posted, I learned more about soldering. I checked almost every trace with a multimeter and used a microscope so I could see more. Still has the same symptoms so I’m going to assume it’s the power supply. I was able to get the stripped screw off of the...

Thank you!

Hey all. I have this powerforce g3 card, which I believe is by powerlogix. I can’t find the dip switch configuration online or another powerforce g3 that looks like this. Does anyone else who have this card know the configuration for the dip switches?

I am still getting this issue using a rom stick and not the onboard rom. Will check for cap goo when I get home.

Hello. I have a macintosh portable (backlit model). I have the "Portable" and "Brightness" control panels on the computer. The Portable control panel shows up, but brightness doesn't. The brightness on the computer worked a few days ago. Any idea why brightness isn't showing up in control panel?

Also interested in this. Did it work?

I have a small budget, and no one to borrow from. How would I do it? Also side note, could my iici psu be used somehow?

I just started doing things with computers. Do you have a YouTube video or a guide that could help? Thank you!

The 145 works works for my iici, but not on my pm7500.

I have a ATX from my iici, and a modern psu from my old gaming Computer. Which one do I use?

I’m thinking about recapping the power supply.

This is the monitor. http://www1.la.dell.com/content/topics/global.aspx/snp/topics/dell-e1713s?c=bm&l=en&cs=bmbsdt1 This is the settings for the dips. I don’t know which one to do. http://myoldmac.net/FAQ/RGB-VGA-DIP-switchconfiguration.htm

The monitor says no signal. Any ideas? I feel like it should at least send a input.

Booting without battery has no change. The monitor was delayed and will be arriving today instead.