Search results

I wrote a decoder for ‘ snd’ resources at one point and I don't remember having to handle anything but sampled sound. I remember seeing music in midi resources or ‘MADH’ (a module format from PlayerPro), but I don't know if the libraries you'd need to use them are available on 68000.

From here, I think: https://68kmla.org/bb/index.php?threads/reverse-engineering-the-macintosh-plus-pcb.38414/post-474068 https://bitsavers.org/pdf/apple/mac/schematic/

https://gamemechanics.itch.io/crystal-quest-classic

Definitely is. Those connectors on the left and right of the daughterboard are ADB connectors.

Ah, yes, I do have a picture of that around from when I swapped in a better unit from a 5300. As you can see, the swappable unit has two ribbon cables running to an external microcontroller. I’d guess one is rows and one is columns. The thicker ones might be power and ground for the caps-lock LED.

ADB is involved, but more to the point of the original question, isn't the connector on the back of that keyboard a ~20-pin ribbon cable? That might be rows and columns that any microcontroller could scan.

Aren't configurations 2-4 addressed by existing, common adapters? I think 800×600 made its first appearance on the Mac as a sub-type of the VGA mode. I've used it on my Q700, though I couldn't swear it was the internal video. But anything capable of SVGA is capable of VGA and doesn't need a...

4, if you count the Japanese ROM from TN138.

8.1 by default, though there’s been some success with backporting as far as 7.5.5. https://68kmla.org/bb/index.php?threads/backporting-hfs-to-mac-os-8-0-and-earlier.35742/ https://github.com/elliotnunn/HFSPlusBackport#status-of-hfs-backporting

Slightly different meanings, in the way I'd use them. IDC implies shrouded and keyed. IDE uses 40-pin IDC headers; an RPi merely has a 40-pin pin header.

Got one not so long ago which didn’t work with similar symptoms, but after opening it up (with one broken clip) the board didn’t look so bad to me. I didn’t feel up to dealing with all the little capacitors, so I set it aside for the time. Anyway, after seeing this thread, I thought I’d take...

Are there plans to sell this board with the SMD components pre-soldered?

ADB pass-thru sounds like a good enough solution to me. Or even using ADB somehow! Plugging in display+ADB together is not so uncommon. Obviously KVMs do it, and some Apple monitors use both as well: the AudioVision 14 and the original Apple Studio displays, for convenience and additional...

If you want Australia but aren’t picky about it being a marsupial, you could call it the “Dinkum Sync’em” (I suppose I’m cribbing Heinlein’s “dinkum thinkum” there)

Just the tiniest bell. I think that comes from an older standard, RS-343, for mono CCTV.

I have a schematic for a 6-pin adapter available. I think it’s common to have the first 4 pins wire sense pins and ground to each other, and the next 2 wire diodes between sense 1 and 2. Order could differ within each of those groups. The remaining four would be for mapping sync signals, but I’m...

I think the problem is the need for VDD2. LocalTalk cabling just has signal and ground, right?

The TashTalk hat is a very simple project to solder, assuming you order now before the DIP transceivers are discontinued.

Oops, did I forget to respond here? I put mine together a couple months back. Easy soldering, though I had a frustrating time on the software side until I realized that login over serial was enabled—a couple of packets would get through, then the baud rate would change. I somehow disabled that...

You can browse on the source sites as well (example: 68k Macs on Yahoo Auctions).