Search results

I haven't experimented much with this, but perhaps Classic environment would retain the advantage if nothing else?

The popular mitigation is to populate the IIci's bank A with 4 x 256k SIMMs, then set the disk cache (or use RAM-Muncher) to allocate the first 768k (or more if you plan to use video modes which use less than 640 x 480 x 8-bit = 307.2k) so that only the disk cache needs to share bandwidth with...

I do- do these closeups help?

Here are the two variants I've seen: The long/thin design is for the original G5, and also the Dual 1.8GHz variant of the subsequent June 2004 model. The other one fits the Dual 2.0/2.5GHz June 2004, the Late 2004, and Early 2005 models. The Apple service manual refers to this as "Soft...

I've been running an ATI FireGL X3 in my MDD G4 which @herd flashed with an Apple X850 XT ROM. It'll drive a 30" Cinema at 2560x1600 on one dual-link DVI port and the second port can run a 1920x1200 simultaneously. OSX drivers only, however. I'm not sure any Dual-link DVI card will have OS9...

Is this any help?

If you're using the LFH-60 cables with two DVI connectors + USB, then they're not actually DVI-DL. It's a discrepancy which can be a bit confusing, but those cables provide dual single-link DVI (two signals displayed side-by-side on the T221), whereas dual-link DVI natively interpolates each...

The three variants I've seen are 820-0550-A, 820-0615-A, and 820-0709-A (550c).

Having read your rationale for using this service I don't disagree outright- the site itself may be more than it appears, however. This request appeared immediately upon navigating to the page (Little Snitch, FWIW.) plugin-container is a Firefox component I rarely see activity from when not...

This is really cool. I'm looking forward to trying this out when I have some free time. Also thanks @cheesestraws for pointing me to this listing for a Data Cannon ROM v2.4 upgrade kit which also included MacinStor v3.2.5. https://www.ebay.com/itm/354631040717 All of the contents are attached...

A few oddities I'm accustomed to when acceleration is enabled alongside drag and drop: - Netscape Navigator draws 'Back' in every button across the toolbar. - Drawing dropdown menus more than once consecutively becomes garbled (e.g. open the control panels menu from the Apple menu, then slide...

This is an exciting project! Excellent work! As a reference point, I've hit a peak of 9.6MB/s using a 32GB SanDisk Extreme (120MB/s) > Stratos CF AztecMonster > Sixty Eight Thousand SCSI Bolt > IIfx (50MHz clock). Seems likely the SCSI Bolt is actually the bottleneck here since it's a 10MB/s...

Here's a couple pictures of the kit and a scan of the manual. Probably less practical than an oscillator swap in most permanent installations, but these are fun and pretty nifty for benchmarking.

The Sonnet/Daystar 100MHz version doesn't decouple from the host's bus clock, it switches from a 4x multiplier to a 3x multiplier to allow for use in 25MHz and 33MHz hosts. The 80MHz model with 72-pin SIMMs does have it's own decoupled clock, but apparently is nearly intolerant of clock...

I'll try to take some more detailed photos of this card next time I have the machine it lives in on the bench. Can't promise that'll be tremendously soon, but I'll push it up the priority list a bit.

A little goes a long way. It's a very low viscosity fluid, like WD-40 or water. I'd expect only a small immediate improvement, but quite a bit more with some careful exercise of the hinges over the course of 10-20 minutes. In my experience the trick is controlling the trigger so you don't drench...

I think the purpose and subsequent speed limitation of the FPGA is to allow the pins to be remapped, since the accelerator needs to be installed at two different 90° rotations on the socket to accommodate the different physical constraints on beige vs blue/white models.

I posted the two cards I found on my Truevision page: jeremywork.com/rd/rd_truevision.html

Did you reset PRAM on the 700 in between the tests? 24-bit addressing may have been re-enabled and that will impact scores.

Not sure about your RAM issue, but I recall a similar SSD symptom when using an OWC Mercury Legacy Pro, which [still] works fine in a TiBook. At the time I concluded it was a thermal issue since I would also experience lockup >30 minutes into a CCC clone. I switched to an IDE-CF adapter with a...