Search results

I donated my Performa 630 parts board to @micheledipaola a little while ago, maybe they can help you out with the DFACII? Are you getting the correct -5V on the MINUS5V rail btw?

I thought booting from HFS+ was PPC only.

I’m having success running with 512MB RAM at 100MHz bus speed. The modules are a matched pair of low-density 256MB modules.

I’ve just liberated two ex-Bradford University 475 type machines, one is an LC and the other is a Performa. Both machines have stock RAM, VRAM and hard disks. The Performa is newer, and includes an Ethernet card. I popped in a battery and it came to life, but it would hang if it tried to...

It’s 4MB onboard. @Bolle made the Reloaded PCB for the LC475, but your ASIC at U3 looks too far gone to save.

😅 :ROFLMAO: I’ve serviced a few SuperDrives, are the 400K drives much harder?

So you're saying you'll refurb the guy's drives? Very generous!

Nearly finished another build – got it booting tonight after a hiccup with UH7. This one's an old Rev 2 board that came to me partially assembled.

Bordeaux are unobtainium anyway.

The DVD decoder card (Bordeaux) doesn’t have an AIO video header, unfortunately, so you’ll have to settle for a Wings A/V.

Also maybe cost saving – and considered unnecessary with the Beige's built-in Ethernet.

At least on Version 2 of the Personality card, those lines are used by the USB chip. I suppose on Version 1 those lines are unused – were they keeping them in reserve for a future USB chip (or another I/O peripheral)?

Correction to the G3 Modem slot - missed these out.

I've been examining the Beige's Modem slot as I'm designing a peripheral for it. I put this image together which shows exactly which lines have been removed as compared to a standard Comm Slot II. It really does just have the bare minimum of signal lines required for a modem, but usefully all...

If you've previously overclocked an LC475 to 33MHz by moving its resistors, do you have to move them back before you can soft clock?

What happens if you remove the jumper?

Is the lower RAM usage also because the Q650 is running in 24-bit mode?

The Sound Manager thing makes sense. I think there's a good motive for patching this out in System 7.5, because it also causes issues with some accelerators. I wonder how deeply integrated it is into the System File - could be as simple as removing a specific resource if you're lucky. A 540c...