Modern G4 Cube PSU replacement?

eharmon said:

Did you just cut the old PSU cable and wire it in?

Click to expand...

Yes.

Thanks for all useful information.

All Guru,
I just have a question. I found a modern one, 24V 3A. I tested with multimeter found out that the polarity of all prongs are in the opposite with apple power mac g4 cube adapter as shown in figure. I put it in cube and it fit perfectly (without electrical).
My questions are as follows;

1. I can't use that adapter with cube unless I find the way to change its polarity to match exactly with cube's polarity or it will destroy my cube. Am I correct?
2. Suppose I can switch all polarity matching cube's original adapter, is it safe to use new adapter with cube? I noticed that even voltage is pretty close to 28V but it has only 3A while cube's adapter said 7.3A.

Thank you in advance.

Welcome KMM, it’s not enough to power the Cube even when you switch polarity of the pins. A Cube with an SSD and not using ADC would not draw as many amps but far from half. I’d keep the connector and find a bench mounted PSU as referenced prior to power you Cube.

Byrd said:

Welcome KMM, it’s not enough to power the Cube even when you switch polarity of the pins. A Cube with an SSD and not using ADC would not draw as many amps but far from half. I’d keep the connector and find a bench mounted PSU as referenced prior to power you Cube.

Click to expand...

Byrd,
Thank you very much for your kind.
I'm confusing since you said that my adapter (28V, 3A) would not enough to power the Cube. I won't use ADC monitor.
On the first page, Stormy had confirmed that 80Watt TDK PSU which has 28VDC, 2.86A, 80Watt, similar to mine, worked. Please explain more to me. I really appreciate all helps.

Thanks.