Snial's latest activity
-
Snial replied to the thread My Mad B&W G3 Setup!.Hi @Phipli , while I wait for the downstairs living room to be cool enough to sleep in (upstairs is 2.5°C warmer), I can already answer... -
Snial replied to the thread My Mad B&W G3 Setup!.I needed them! Upgrading from 350MHz to 400MHz needs 6 jumpers. The HD only provided 5, but I could use the end one from the original...
-
-
Snial replied to the thread My Mad B&W G3 Setup!.I think you're right! I saw they might be when I posted the photo. Oh, OK. But how would a 512kB ROM work? This is the ST MF101. I...
-
-
Snial replied to the thread My Mad B&W G3 Setup!.Hi @Phipli ! I found a 4GB Seagate SCSI HD with quite a few 2mm jumpers and an ST M28F101 -150 which is a 12V Flash with the same pinout...
-
-
Snial replied to the thread My Mad B&W G3 Setup!.Interesting, I also might have some on some junk electronics (likely some bust 3.5" HDs).
-
Snial replied to the thread My Mad B&W G3 Setup!..... I'll give you 1 guess on whether I knew that trick ;-) By changing the PLL? Oh gosh! It's just a jumper block! (S = Jumper...
-
Snial replied to the thread My Mad B&W G3 Setup!.That’s very kind (you know my address)! But only on condition I send you a replacement or reimburse you by some other means. I still...
-
Snial replied to the thread My Mad B&W G3 Setup!.Yes, I usually try to make sure the ICs are readable, but that was shameful! I opened it up and took a new photo: So, it's an AMD...
-
-
Snial replied to the thread My Mad B&W G3 Setup!.Thanks for the reply! When you say "our" ROM, do you mean the ROM in the SATA PCI card or the ROM in my Blue and White G3, or another...
-
-
Snial replied to the thread My Mad B&W G3 Setup!.(and @croissantking , @adespoton ). I don't really have a proper programmer. To program the Flash I'm thinking of doing something fairly...
-
-
Made on a Mac IIfx with Photoshop 2.5.1 under System 6.0.8 The first drawing I made with my newly acquired IIfx last year. No layers...
-
If I put pressure on the palmrest where the GPU is I was able to get the screen working It did show some graphical glitches on the...
-
Snial replied to the thread Xliinx/AMD: no more free Linux licenses....The lack of OSHW FPGA tools is mostly why I've shied away from FPGA development. I just don't want to do it on a PC/Windows. I...
-
Snial replied to the thread Powerbook 1400: Booting from SD Card & Adventures with 3Com Etherlink III.Hi @croissantking, Thanks for the reply! Yes, in AppleTalk it appeared as Alternate Ethernet. Couldn't see any reference to it in...
-
Snial replied to the thread Powerbook 1400: Booting from SD Card & Adventures with 3Com Etherlink III.I have a sonic ConnectCard for my PB1400c/166 and I've installed drivers, but I haven't managed to prove it can work yet: maybe I need a...
