Snial's latest activity
-
Snial replied to the thread PowerBook G4 12" 1.5GHz, stripped heatsink screw... Possible Solution!.Hi folks, Thanks for the replies. So you're saying that the screw studs are soldered, but there's nothing below the studs on the PCB... -
-
Snial replied to the thread PowerBook G4 12" 1.5GHz, stripped heatsink screw... Possible Solution!.I have thought about that, but the screw is only about 1mm, maybe 1.5mm in diameter ( would have to check). But I don't have a tap and...
-
Snial replied to the thread PowerBook G4 12" 1.5GHz, stripped heatsink screw... Possible Solution!.OK, I think I've figured out a possible solution to the first issue. I could place small washers on the LHS screw, but below the brace...
-
Snial posted the thread PowerBook G4 12" 1.5GHz, stripped heatsink screw... Possible Solution! in PPC PowerBook & iBook.Hi folks, Back around 2016, my beloved PowerBook G4 12" fell off a table and the inner pin from the PSU cable broke, falling into the...
-
-
Snial commented on slomacuser's profile post.Aaaah, left-handed! Very good!
-
It was 1995 and I was 15 years old. I had been using a Mac for about a year and I drew this.
-
Snial replied to the thread Pseudo-Mac mini G3.Or @croissantking : if I sent either of you the iBook, would you want to do that? Would you prefer me to send the logic board suitably...
-
Snial commented on RetroTechTom's profile post.How do you know it's a GPU issue and not an LCD cable issue? I ask, because I have an iBook G3 which I believed had a GPU issue, but...
-
Snial commented on croissantking's profile post.@pc2005 , https://datasheets.chipdb.org/Chips/F8680A_Rev_2_0.pdf is the data sheet Rev 2. I may have some additional documentation in my...
-
Snial replied to the thread LC Models - Which to keep?.I knew about disabling the cache, but didn't think about the System 7 limitation. The P400 will run System 6.0.8. I think what I meant...
-
Snial replied to the thread LC Models - Which to keep?.I'll jump in first as it'll be the least knowledgable (and because I have a P400)! the LC475 is an '040, so there are some things that...
-
Hi folks, A friend of mine (the chap with the PB5300c I still haven't fixed) gave me a whole bunch of 30-pin SIMMs when I picked up the...
-
@Phipli I hear you regarding the cost of … everything. My symptoms were that the computer’s front light would light up momentarily when...
-
@Snial - exactly - I suspect it was overdue!
-
Snial commented on croissantking's profile post.@Phipli , PowerMac G5 had a much bigger case!
