Recent content by Realitystorm

For both the PB150 and LC630 there is an enabler that is required when you want to use the internal IDE drive after booting from a different device, e.g. CD ROM or external SCSI. https://macintoshgarden.org/apps/select-cpu-enhancements I am not sure if the are needed for 7.5.3 or not, but you...

Sigh, tried to use my LC 630 today, I think it needs a recap. It will boot from the CD ROM but will not boot from the external SCSI or recognize the internal IDE.

Did not have a chance last night, will do a "for all systems" install so the right enabler should be there.

No problem. After trying a few key word combos I tracked it down. https://68kmla.org/bb/threads/se-video-adaptor.51346/post-579072 For the gamma controller do you mean https://macintoshgarden.org/apps/gamma

Thanks, I think I found the thread you mentioned Post in thread 'Unknown Mac SE PDS card' https://68kmla.org/bb/threads/unknown-mac-se-pds-card.42060/post-500401

Glad my photos helped, FYI the fan for mine is mounted at the top of the case directly under the vent.

I might have time tomorrow to create an image from my CF IDE drive from my 630 system. If i do I will upload it for you

Finally getting around to doing a post on my Mobius card. I want to include a section on the pin mappings for the cable. Did you ever get it sorted out? FYI: I found it to be the most stable with 7.1 + System update 3.0 (from the Legacy Recovery CD)+ Compact Virtual 3.0.2 + Mobius Video 2.5...

Some options are reviewed by Ron.

You may be able to use virtual if you upgrade to a full 030 for virtual memory https://www.savagetaylor.com/2025/07/06/68k-accelerators-connectix-compact-virtual/

The daughter board on my card looks a lot like the daughter card on the top left Generation X board in the photo that mikes-macs shared from InfoWorld June 19, 1989 Volume 11, Issue 25 (I also found the other article he shared by Larie Flnn from InfoWorld Volume 11, Issue 19, May 8 1989)

Wiring. The white and black wires from the power supply connect to the red and black wires that connect to the board

From my quik30 plus. 5v, 2a, 17w

@mikes-macs The top left image looks a lot like the graphic board I am trying to identify. Do you remember where you found this article? Also what do you mean "standard video drivers" you didn't need a special enabler to use it?

May have found the driver, now I just need an adapter for the 9pin likely TTL to something modern. https://macintoshgarden.org/apps/memory-plus-mini-video-driver