Recent content by ppuskari

While not the official firmware release I can offer to you those with the REVB Masteries devices this firmware file which you can deploy to your devices through the newly updated fujinet web flash utility. This is from about 6 pm CDT 05/27/2024 Build..... Again it's only for the unmodified...

This is a great thread and I'm about 85% understanding the sequence and all. I'm attempting to get my GatorBox CS and the like units (I have all the variants except he MMAC version GatorMMIM) working to participate in the Globaltalk without using AIR. If that is even possible. I do have a...

Yeah, that is an early Sound Accelerator II card by Digidesign. Meant to work with Yes the early Sound Designer and Sound Tools applications that utilize the DB25 1/2 rack interfaces they had at the time. There is an Analog interface and a Digital Interface as well that can be daisychained...

I know this is from a bit ago, but I did want to chime in that I do own 2 of the PCI adaptor boards for the Stage II rockets. I got them both from an ex-Radius engineer several years ago He said they came out of the Radius fileserver pre-press machine that used 12 Rockets stage II in it. I...

I can help with the manual and the software from my FutureSound GS board. Sadly I think I will also never see my board back. It's currently in Australia with George Bodie for cloning and well that's been 3 years? now with near zero communication. But yeah, the manual and software I can help...

Please please please see if you can find the rare Apple /// UniFile DuoFile controller and maybe the zipgs that may be in a box there. Before his death he did have the controller in a Apple /// though as we were trying to get it working with one of his twiggy drives. I would hate for this...

I know it's 2 years later, but in the process of rebuilding my Avid Media Processor rig, I needed these drivers for my own Bluestreak Nubus card.  I found them in my own archive. The floppy is here somewhere but not located with it's box which I also have.  Hopefully this helps someone.  I'll...

Excellent... A bit offtopic, but the picture of your lab applefreak is AWESOME!!! I'll have to post pics of my kindred lab to yours sometime soon once I get the cubicle area finished and the rest of the basement sorted. My question to you is? I see you have a Tape 40SC there on your storage...

gecko, that is perfectly normal for a IIGS. You will need to either find a 5.25" floppy drive and some software to boot, or a 3.5" drive and some software to boot, or even get a Localtalk box, and AppleShare 2.x (for sure) or 4.x (maybe) to remote boot the IIGS off the fileserver.. It's been a...

No doubt! If you ever have used SpotShot! Carpet cleaner and stain remover you probably know how incredibly wicked and powerful that stuff is. When it proved safe on the labeling I was surprised. It wasn't as powerful on grease pencil as I would have thought, so I figured WD-40 would be good...

Over the weekend I was fortunate enough to get a near mint condition Macintosh IIvx for my collection. I don't have one of those until now. Down side is that I learned that Spot Shot carpet stain remover works EXCELLENT on grease pen markings by the thrift store. Learned that WD-40 works TOO...

Was checking 8bit sound and fury and alas even they don't have the Passport TurboTrax software I need for my lovely Wenger (Passport) Soundchaser system. I have the ever annoying chord training software and the system works and sounds great, but the main sequencer floppy came in unreadable...

Hey also curious. You mentioned you had a "little box" for that Sound Accelerator II board. What does that look like? I've seen the Black and Beige small metal boxes that hook up with DB-25 cabling to the back of those cards. They had the analog one and a digital IO one, but they were both...

Now anyone want to tackle the old Digi, and Avid dongles? I'm all for that! It's a nightmare even finding the software let alone the right dongle AND the right hardware! Luckily some of this stuff was done back then when it was very not right, so today we can actually USE the software with the...

If you can wait like 3 or 4 weeks, as I'm uncovering more of what's in my basement and our spare room as we clean out the house. I MIGHT still have my extra Nubus breakout "stick" for that VideoVision card you have. They are actually very nice cards and the conversion is about as close to an...