Recent content by BespokeMan

Not touching UE10.

No chime. But I did get a chime prior to recap. Here's a photo of UE8.

I have the same simasimac pattern. I also ordered new RAM from OWC but that didn't fix the problem. Might just send it to someone who can take a look and troubleshoot it.

I got 4 new SIMMs from OWC. I still get Simasimac. Do I need to install new RAM slots with working clips?

Same SD to IDE adapter works inside a PowerBook 5300cs.

Most definitely. Need to start looking for a replacement.

Yes, the option to initialize was grayed out in Drive Setup. That’s why it wouldn’t work even with a USB sd card reader, @LaPorta.

I've successfully installed Mac OS 7.6 to my PowerBook 3400c! For those wondering here's how I did it. I popped my SD card into my Pismo using the SD to IDE adapter. Booted into OS 9 Boot Kit v2 on a USB flash drive then formatted the SD card into 3 partitions using Drive Setup. I took out the...

I don't believe it can do the low level formatting required. Also, I don't have one.

I use a SD to IDE adapter and put it in an external enclosure that connects to my Pismo via Firewire or USB.

I managed to get it working albeit not consistently. Here's how I did it. I used my Pismo running Mac OS 9.2.2. I formatted the CF card in the PCMCIA card reader using Drive Setup making 3 partitions (one for OS 7.6.1, one for OS 8.6, and one for general files). Then I restored the PowerBook...

No CD drive but I copied the files to a CF card which is plugged in via a PCMCIA card reader. The PowerBook 3400 keeps ejecting the PCMCIA card reader, though. I formatted the SD card using my Pismo.

I've a Pismo, iBook G3 Clamshell, Mac Mini G4 and a Mac Mini 2018. I used my Pismo to format the CF and SD cards. CF cards won't boot because they aren't the industrial type.

Right. I've tried formatting it as HFS with Apple Partition Map as well but still doesn't work.

My PCMCIA CF card reader and SD to IDE adapters have arrived. I've "burned" the PowerBook 3400 Restore CD to the CF card but it won't boot in my PowerBook 3400c via the PCMCIA card reader. I've also copied Mac OS 8.6 System Folder to the SD card prior to putting it inside but also no bueno. Any...