Recapping apple ii monitor model A2M2010P

[falen5]

Hellp people. been away from old computers for a while but recently picked up an apple iie with the above monitor from an old friend

Powered it up after an inspection and boom - apple iie power supply lots of smoke. Opened it up and found 1 cap in bits and another cracked

replaced them with help of this utube video  

got it working - monitor working - all good.

but after 10-15 minutes monitor display starts jumping, and stretching - figured it needs recap as well

opened it up and found same caps on a small circuit with the fuse (fuse board i guess)

these are the same RIFA caps that went boom on the apple psu.

there are 4 of them

the big one is .47uf  250 volt X......... i can find replacement for that ok  (it looks ok, no cracks like the other 3 but seems i have it apart ill replace it !!)

but the other 3...2 of them have a Y on them  im not 100% sure what im supposed to replace them with

will these do

http://www.ebay.ie/itm/20Pcs-472m-4700PF-X1Y2-Ceramic-Disk-Safety-Capacitors-250VAC-Y-Caoacitor-/181847140425?hash=item2a56ef2849:g:~74AAOxyj4hTGVc4

the 3 small caps are all cracked and i wont power this thing back up until i replace them  cause they will probally explode as well

ive looked at all the caps on the main board , cant see any bulging or signs of leakage.

Is it likely that the 4 RIFA caps on the fuse board are the problem or is it best to just replace all the caps on the main board as well

cheers people

 

[falen5]

looking at the pictures of those 3 caps (my eyes are gone to the dogs) its a miracle the monitor works... but it does

the .47uf cap in the powersupply exploded, bits of it everywhere and the brown goo everywhere