Quadra 630 board compatible with Performa 6200 case?

[David Cook]

The Quadra 630 / LC / Performa series seems to have the same case, accessories, and motherboard connector/size as the Power Macintosh / Performa 6200 series. Does anyone know if the cases/motherboards are interchangeable?

They fit nicely. I just haven't had the courage to plug in the power yet.

 

[jasa1063]

The Quadra 63x/Performa 63x/Performa 52xx/Performa 53xx/Performa 62xx/Perform 62xx cases are all supposed to be based on the Quadra 630 form factor and should be interchangeable. Have a look at this post on Lowendmac:

Converting a Quadra 630 into a Power Mac 5200 | Low End Mac

 

[Trash80toHP_Mini]

Take heed, this subject has come up before so use the search function.

Form factors are pretty much identical across desktops and AIOs. FuglyTowers have a second slot in the PCI era, so that's a differentiation you're not facing.

PSU, Case and Harness cannot be assumed to be compatible when swapping boards around. Due diligence required.

LEM articles are a blessing and a curse, depending upon many factors. I'd take any Y2K article there with a block of salt. The info available around these parts in the last decade is a far more reliable source, if not always correct. Nothing is perfect.

 

[demik]

Yes they mostly do. x400 and x500 boards do require 3.3V which isn't provided by earlier PSUs, but that's not an issue here.

 

[Trash80toHP_Mini]

Yep, but not necessarily. ISTR someone finding a harness differential in upgrading a P5200 AIO to Q630 in the last year or so?

The NuBus ->PCI architecture shift on the 630 drawer machines changed things dramatically on both harness and PSU fronts.