QS motherboard in a DA case

ArmorAlley

Well-known member
Is it safe & possible to put a Quicksilver motherboard into a DA case?
Is the DA power supply enough or would the original PSU from the Quicksilver be required. I expect that there are power differences and that the QS PSU is necessary.
Is there anything that I haven't considered in doing such a transplant?
Thanks.
 

Phipli

Well-known member
Is it safe & possible to put a Quicksilver motherboard into a DA case?
Is the DA power supply enough or would the original PSU from the Quicksilver be required. I expect that there are power differences and that the QS PSU is necessary.
Is there anything that I haven't considered in doing such a transplant?
Thanks.
The DA basically is a QS, so it should be just a straight swap with no other considerations.
 

herd

Well-known member
It will fit. Depending on what CPU you use, you might need to add 12v to power it. The QS logic board and power supply have an extra 4-pin connector to power the CPU. Let us know how it goes!
 
Top