IIciNov90
Well-known member
I was able to recently obtain a 15" NEC 1530 15" LCD display. It is white and matches my IIci nicely. I have a Radius Precision Color Xp nubus card. The resolutions listed at the following web page are all for 24-bit mode.
http://lowendmac.com/video/radius24xp.html
Can it support higher resolutions such as 1024 X 768 at lower bit depths? The native resolution on the NEC 1530V is 1024 X 768. Thus far I have been unable to get it to show up with the Radius. I am running 7.1 but do not yet have the Radiusware installed. The card does work though because I was able to see both the 13" RGB and a cheap Apple 14" Multiscan with no problem. With the NEC I have one of those silver adaptor boxes with the dip switches set to 1024 X 768. I have not yet tried any of the lower resolutions. I cannot seem to be able to bring up any resolution options in the monitor control panel, even when pressing options while pressing the options key. All I get are some Gamma choices. That's about it. When I last ran higher resolution monitors it was under 7.5.X so maybe the 7.1 monitors control panel does not accomodate the multisyncs so well.
Any tips?
thanks,
Brian
http://lowendmac.com/video/radius24xp.html
Can it support higher resolutions such as 1024 X 768 at lower bit depths? The native resolution on the NEC 1530V is 1024 X 768. Thus far I have been unable to get it to show up with the Radius. I am running 7.1 but do not yet have the Radiusware installed. The card does work though because I was able to see both the 13" RGB and a cheap Apple 14" Multiscan with no problem. With the NEC I have one of those silver adaptor boxes with the dip switches set to 1024 X 768. I have not yet tried any of the lower resolutions. I cannot seem to be able to bring up any resolution options in the monitor control panel, even when pressing options while pressing the options key. All I get are some Gamma choices. That's about it. When I last ran higher resolution monitors it was under 7.5.X so maybe the 7.1 monitors control panel does not accomodate the multisyncs so well.
Any tips?
thanks,
Brian