Well. Lately I've been studying 68k assembly. I find it a lot harder to understand than my ol' Netronics Cosmac Elf II's 8-bit RCA 1802 in hex. Still, i really want to start developing stuff.
I can find much of the 68k instruction set reference on many website but, there aren't many about the macintosh toolbox. Most of them (like Inside Mac pdf's) got reference about using the toolbox with C and Pascal, and almost no assembly reference. It leaves me with unanswered interrogations about it. With some hope i searched in some forums on here but did not found what i was seeking out. I am mostly looking for the traps's Input/output, etc (Axxx).
The assembler i am using is Lightsoft's Fantasm 6 ( which has become free) with Anvil.
So, if you have any suggestions like books or online resources for me, could you post it here?
Thanks for replies!
Edit: I specified more what i am searching for.
I can find much of the 68k instruction set reference on many website but, there aren't many about the macintosh toolbox. Most of them (like Inside Mac pdf's) got reference about using the toolbox with C and Pascal, and almost no assembly reference. It leaves me with unanswered interrogations about it. With some hope i searched in some forums on here but did not found what i was seeking out. I am mostly looking for the traps's Input/output, etc (Axxx).
The assembler i am using is Lightsoft's Fantasm 6 ( which has become free) with Anvil.
So, if you have any suggestions like books or online resources for me, could you post it here?
Thanks for replies!
Edit: I specified more what i am searching for.
Last edited by a moderator: