Mac SE Radius Full Page Display 64KHz

[billbucks060]

Hi,
I'm restoring a Mac SE M5011 which has a Radius FPD 64KHz with a 9 pins port at the back see photos.
I found this software for Mac SE: https://macintoshgarden.org/apps/radius-system-software-v25, and
DB9 to VGA converters online but I wonder if this will work on a new screen or if I need to do something specific.

 

[bibilit]

IIRC it won't work without the right display

 

[Trash80toHP_Mini]

Excellent, just starting to work on that setup! Should have that board here in a couple of days, but no cable. Can you buzz the connections from 9pin header on the PCB to the DE-9F positions on the backplane plate for me? Looks like there are only three wires implemented? If so I think that'd probably be, Signal, Sync and Ground.

Hi Res pics of cabling setup and both sides of that board would be much appreciated. All hope is not lost.

Radius FPD w/9 pin header on board or DE-9 connector on backplane: relevant links to info from anywhere wanted for scaling project

Any links to any info at all on these cards/displays would be appreciated Eventually looking to clone FPD and TPD cards eventually, but looking at nailing down output/scaling solutions first. Had some luck with TPD/Extron Scaler in the past...

68kmla.org