cranerobinson
New member
The machine (240 V Classic - not II) has not been switched on for about 4 years and appears dead. I have opened up and can see the voltage on the inside of the mains switch but I can see no voltages at all further down the line, e.g. on the 14-pin connector to the motherboard. The fuse is OK. My impression is that something basic is wrong with the Analogue/Power Board. I can't see any burn marks or spewing capacitors (it looks very clean inside) and wonder if it is something simple. What could I do to diagnose the problem?
Grateful for any help,
Crane
Grateful for any help,
Crane