Lombard and Cisco Aironet?

[leosadvs]

Hi!

I got a really cool lombard, running 10.3 and 9.22, ethernet connection works perfect, but i can't use the wifi card, it's a aironet 350series in any OS, the system just hang until i unplug the card, i used the drivers found in the cisco webpage.

anyone have this card working on a mac? i know the card is good because i use it on my Handheld pc.

 

[Strimkind]

This website has all you need to get that card working

 

[phreakout]

leosadv,

Specifically which Mac OS are you trying to use this card under, Mac OSX 10.3 or Mac OS 9.2.2? If it's 9.2.2, you could try and see if the card is compatible with the Orinoco WaveLan drivers, as they are supported under 9.2.2. I'm surprised OSX 10.3 doesn't pick up the card and support it with available drivers. Try looking under the System Profiler in the Apple Menu to see if the make and model number are listed.

73s de Phreakout.

 

[leosadvs]

This website has all you need to get that card working

thanks, the problem was a old firmware in the card, so i downloaded the last and work nice. thanks for the link!

leosadv,
Specifically which Mac OS are you trying to use this card under, Mac OSX 10.3 or Mac OS 9.2.2? If it's 9.2.2, you could try and see if the card is compatible with the Orinoco WaveLan drivers, as they are supported under 9.2.2. I'm surprised OSX 10.3 doesn't pick up the card and support it with available drivers. Try looking under the System Profiler in the Apple Menu to see if the make and model number are listed.

73s de Phreakout.

i tried in both, yeah, i was surprised about osx too, but i installed the last firmware and drivers for the card and worked great in osx and os9.

just for curiosity, this is what i got in the system profiler

TXN,PCI1210-00:

Name: cardbus

Type: cardbus

Bus: PCI

Slot: PC Card

Vendor ID: 0x104c

Device ID: 0xac1e

Revision ID: 0x0000

thanks for all your hel guys