amedeo_68k
Well-known member
Hi all,
I have a color classic with an Asante Ethernet board installed.
Drivers are fine, card gets recognized, but there is no way to estabilish a link, green light turns on, but no luck.
If I instead use an Asante SC/EC (Scsi / Ethernet) adapter it works perfecly.
I tried with normal cable, cross cable, 10mbit only switch, no way.
Ideas ?
Thank you
I have a color classic with an Asante Ethernet board installed.
Drivers are fine, card gets recognized, but there is no way to estabilish a link, green light turns on, but no luck.
If I instead use an Asante SC/EC (Scsi / Ethernet) adapter it works perfecly.
I tried with normal cable, cross cable, 10mbit only switch, no way.
Ideas ?
Thank you