Greetings all,
In addition to SE Mac variants and a Quadra 650 I have a G3 beige desktop machine that I know little about: It has the 300MHz CPU, 760 MB memory, ATI video card, CDR, ATAPI ZIP drive and a 9+ GB HD. I believe the "personality" card is the "wings" variant; it has RCA and S-Video...
Working on a Mac SE (same as was referenced in PSU issue post earlier). After substituting a known-good PSU I assembled the computer and powered on, with the back shell removed for observation. Observed the following: No chime, black screen and a hissing, crackling sound. Immediately shut...
Been reading http://www.ccadams.org/se/classicmac2.pdf and also Pina's books for info on repairing Mac SE power supplies. I have a Sony CR44 that tests the -12VDC lead as -8.5, +5VDC as 5.3 (both lines) and +12VDC as 13.5 and 14.2 respectively. I have already recapped the PSU and am...
About a year ago I bought - on eBay - a Prodigy SE accelerator board, which I intended to plug into the processor expansion slot on my SE which has a SuperDrive. Not knowing much about compact Macs or anything about the board, I put it in a drawer for safekeeping until I was ready. Recently I...
I have an SE/30 that I am in the process of restoring. I bought it from an academic and it immediately displayed problems: jittery video. On the advice of those who knew more than I, I sent the board out to be recapped. Back from recapping and that much poorer, I find the video problem was...
Yesterday I tried to boot a recently-acquired SE Mac and am experiencing what I believe is a hard drive issue: Similar to the description on http://www.ccadams.org/se/boot.html, the machine has an internal HD but will not boot from it; I can boot from a floppy (OS 6.0.8) to a desktop but the HD...
Is there an EPROM / EEPROM which has the same pinout and capacity as the Macintosh's masked ROMs? I would like to copy my FDHD's ROMs and equip another SE with FDHD capability. Aside from the MFM 1.4 drives, I believe these are the only differences between the machines. Am I correct?
-CH-
I acquired an SE about a month ago - first one I have owned - and recently posted here a question concerning printing from the SE. (I have a StyleWriter and couldn't make it work with the SE / OS 6.0. 8-) .
Since then I have been running tests on the machine and today ran Snooper 2.0, which...
Hello! I am a first-time poster here with a question specific to printing from a Mac SE that is running OS 6.0.8. (I also have other Macs: SE/30, Quadra 650, beige G3 desktop).
The SE is recently-acquired and my first compact Mac, about which I know comparatively little. I am currently...