I am probably recalling wrong, but I seem to recall using a high density drive on a Apple IIgs just fine (IIgs only uses GCR 800K disks). It *might* be worth a shot then to hook up your HD drive to your DD SE.
Sweet you have one of those wheel switches, those are fantastic!
I would start with 640x480 @ 67Hz. That should be like mac 13 or something on your adaptor. As trash pointed out the KDS RAD-5 should work just fine. I have a Dell ultrasharp 2007FP that I use with my old macs, it has 1600x1200...
I remember 3 years ago buying 200 brand new double density (720/800K) floppy disks for like $20 total. They were sold in packs of 50 for $5, and I bought four packs.
Now I can only dream about finding them for 0.50/piece
https://cybarcode.com/pioneer/software/lbc-nc3_bar-n-coder
It looks like someone still has a new copy of this software banging around, for the grand price of $95.
I thought that was funny
ATA was on the Quadra 630 board too, and is right on! The performance can give SCSI a run for it's money (SCSI as implemented by Apple at least, we're not going to talk about the FWB Jackhammer 16-bit wide SCSI card [;)] ]'>). Be thankful for the fact that you can toss in any old ATA HDD...
It's risky enough traveling with a compact, and with you traveling internationally... yikes!
The best way might be a hard-sided container, with *lots* of padding inside for your CC. Still, whatever you do is going to be quite bulky, and that's a pretty big thing to have to worry about. Carry-on...
The only difference between the real Quadra 630, and the performa and LC models with the 68LC040 CPU is just the CPU, they both have the same serial hardware.
Yes, the serial hardware works well on the Quarda 630.
Not completely identical, there are a few differences.
It is not a huge surprise that there are businesses that use dot-matrix printing technology. It's incredibly reliable, and extremely cheap (to print). There are also some environments that lead to other print technologies not being a very good fit, such as a kitchen printer, where the heat from...
I dunno, I've drawn enough schematics, and the thought of cloning Apple or BOMARC's schematics, without making any errors is pretty daunting to me. That's a lot of pages, and a lot of connections.
You might consider drawing your new schematics in KiCad. They have an export to SVG/PDF/EPS/PS...
BOMARC has SE/30 schematics, that I find a little bit easier to read than Apple's ENGINEERING RELEASE schematics.
Bear in mind, that this is a LOT of work.
IDE, ATA, AT Atachement, PATA all mean the same thing. I believe AT Atachement is the 'proper' term?
SATA is a newer technology, *Serial* ATA. Also significantly faster.
With the proper 2.5 to 3.5 adaptor, that SSD should work. I got an 80GiB unit in my Q630.