Search results

The Powertoggle works with a normal slot adapter and AV video card, but not with my Sonnet upgrade card and the same video card. It chimes fine with the Sonnet card, but I get no video. Any ideas on what I can do about this? Do I HAVE to have a PRAM battery to use the Sonnet upgrade?

LC LC Performa 6115CD Performa 6115CD Centris 650 7100/66 w/Sonnet 7100/66 w/unknown accelerator 7600/132 w/Sonnet Quadra 660AV 9600/300 9600/233 9600/200 w/Sonnet 6100/60av damaged case G3/233 AIO Mobo I'm looking to keep an LC, 7100, 660AV, and 9600, but most of the rest may be...

I set up my SE on the island in our kitchen as a cookbook. I have around 10 recipes entered into it, I still have like 100 to go from little cards. :p

I found a couple old AT PCs in the scrap pile at my local dump and carried them up to my mom's car. I went back and did a bit of poking around and couldn't find anything other than a couple crushed PCs. I then noticed a piece of damaged beige plastic that was obviously the 'snow white' design...

I'm online with my Quadra 630 via a PDS ethernet card, and just decided to stop my and say hi. Now if you'll excuse me, I'm gonna go and download ShadowIRC. :D

Got it in a trade with defor. It came without any drives and 256MB of RAM. It's replaced my Sawtooth as my main machine. I put a USB hub in the Zip bay. :D

What would need to be done to the iMac slotload CD and DVD drives to use them in on a regular IDE bus? Plug the IDE connector in off-centered and make a power adaptor?

My Sawtooth won't sleep. It has a PC power spply, and when I try to put it into sleep mode, it says the case is open. Even though it's closed. Is there any way to bypass whatever the switch it with software so I can make it sleep?

It started on Wednessday. I picked up a Dell Latitude C600 (no drives, battery, or RAM), Inspiron 4000 (no drives, battery, or RAM), and an IBM ThinkPad 365ED (some broken plastics, no HDD) from the local college surplus for $1 each. Then yesterday I got an IBM PS/2 and a custom built 766MHz...

Well, John8520 mentioned to me in IRC that the Radius control panel allows you to rotate a regular monitor. Is there anywhere I can download it?

http://slashdot.org/articles/07/05/31/1546213.shtml Hehe, the Mac Plus is still more productive than a dual core AMD PC. :D

Yesterday I picked up a lot of stuff. For free I got: Quadra 630 (with box) Quadra 650 PowerMac 7100/66 IIci with 12" RGB Monitor 20" Radius Monitor 21" SuperMac Monitor (I don't have the video cable for it though) IIgs 800k floppy drive (was used with the IIci apparently) IIc 5.25"...

I have a dead slotloader on my hands. I'm doing the ATX conversion. I need the power adaptor and video adaptors wired up. I'm willing to trade my Power Mac 7100 (yellowed, no drives) and Performa 600 (good condition, 160MB HDD, caddy loading CD drive with no caddy, and 1.44MB floppy) for...

I picked up all of these today. The Color Classic had a dead mobo. I put the mobo from the Performa 550 in it. It came in a carrying case. The ][e came with the duodisk, color monitor, mouse, and a Gravis joystick. I got tons of accessories and programs with the ][e. There's some copys of...

I got a d|i|g|i|t|a|l Server 3000 last week. :D it has 4 of the 8 RAM slots filled with 64MB sticks, so that comes out to 256MB. It can have up to 2GB of RAM. It has a 4GB HDD in one of the CD bays, along with something like a 4.6GB SCA drive in one of the four hotswap bays. It has a...

For around 23 seconds when I turn it on, it displays white diagonal lines on the screen, then proceeds to boot. The lines go from the top left to the bottom right. They are one pixel wide, with a two pixel wide black line between all of them. Any way to fix this? Once it starts to boot, it's...