Search results

The Pic I took isn't very good, but I was able to see an NCR 5380 SCSI Chip on it. number is (Best guess from my pic) CPO7213 006-1082073 9032K Buddy of mine just emailed me this...

It is scanning patients every day (when I'm not futzing with it). If it stops working while scanning a patient it isn't desirable, but not the end of the world. Most of these systems are not on auxiliary power. It requires a 40 second reboot process and maybe a minute or so of entering into...

That's true! There is a SCSI peripheral board (Controller) in the rack and an OMTI 5200E Board. The OMTI, per my understanding is just to convert the floppy from MFM for the scsi controller. I believe the hard drive data goes directly to the controller even thought the cable is connected to the...

I really don't know.

That's a good idea. I'll try that next. The drive I cloned that does boot the system is a SCSI2 drive, but there may be downward compatibility so that is would work with a SCSI1 device, but that's not the same thing as telling the Zuluscsi to emulate a scsi2 drive

This on is typical. I don't know what to make of the DMA info at the bottom.

Thanks for the response and the welcome. I haven't pulled the CPU out of the system to check the firmware labels, but the initialization screen that comes up on powerup says .43 version proms. The software its running is a forth based application written by a French nuclear medicine company...

I have, but nothing has popped out at me. Anything in particular you are thinking/looking for? A friend figured out why the scsizulu.ini file wouldn't load. I didn't have file extensions turned on so windows 10 was naming the file zuluscsi.ini.ini Rookie mistake. I'm going through the...

First post and first attempt ZuluSCSI device so be gentle with me. I have a Motorola MVME 133XT 68020 SBC that I'm trying to run with a compact ZuluSCSI card. The system recognizes the SD card as a drive without SCSI errors, but throws a "bus error" if I try to access it. (Launch application or...