Search results

I recently got a battery bombed iici. Most of the board is fine just damaged around the battery area. Missing parts are Y6 and Y5. I have non working iicx board. Can you used the missing parts from the iicx board?

I recently won this in an auction. Seller described as fully working. I plugged to check if it works and it doesn’t. After upon closer inspection I noticed that the there is one cracked chip. Is this common chip that I can replace from another nubus video card?

I recently acquired a PowerBook 540c. It boots up but the screen is having weird issue. It flickers between dark and bright and it has line all over making text unreadable. I did install 7.6 on it rule out the font issue for text. But nothing changed. Any idea what might be causing this? Do I...

When I try to open the PC set up control panel I get messages saying card is not installed. I swapped the known working raiser card to rule that out. It’s seems the DOS card is the issue. Is there anything particular I can check to see what might be going on?

My G4 cube has red light when i turn on. Seller sent a video of it turning it on before they shipped it. It got banged up during shipping and now when i turn on it wont boot up and all i get is red light. After i do the PMU Reset the power light flashes white and wont go to solid white. But...

Hey guys, I recently acquired these cards as part of a lot. Any idea what these are what they are used for?

The power adaptor blew up in smoke. I am trying to open to it see what blew. Problem is I can't find a way to open it. Anyone know how I can open it?

I recently acquired this card and wondering if anyone used this card or can help how i can use this.

Is 840av board compatible with 8100 PSU? I am thinking of putting the 840av board in my spare 8100.

I recapped the IIvi and when I turn on the power nothing happens. I did test with knowing working PSU one from q700. Any ideas on what I need to check.

Does anyone have STL file for me to 3d print the mounting bracket for Zuluscsi?

I am thinking of adding fan in 6100 with DOS card installed. As you know both CPU are exactly on top of each other and when they are running it gets quite hot. So i am thinking of adding a 5V or 12V fan to cool things down. Has anyone done this? I will be installing Zuluscsi on there so i have...

Hi guys, This card was in my 7500. Any idea what this is for? This do not have a port on side.

I recently acquired 8600/300. It powers on but doesn’t have chime or video. Any idea where should I start to troubleshoot this. I did replace the PRAM battery. Last 2 pictures are of the processor.

Hi guys, I recently picked up 2 q700. Both do not have boot chime or video. Upon closer inspection I see some modifications. On 1st the oscillator was removed and there is plastic on top of it (pic 1). Does the oscillator (pic 2,3) with bent pin go in there? There is oscillator tied to PSU...

Hi guys, I have below card on my 8100/100av. I did a fresh install of Mac OS 7.6 and installed the extension from the Newer website. Screenshot of the extension I downloaded is below. Everytime I try to boot the system it freeze right when it loads the newer extension. It boots find when I...

Hey guys, Is it possible to remove color classic name plate? I have a great condition color classic that I would like to remove the name and put color classic 2 on it.

Hi, I recently acquired these cards along with snooper and wanted to know what they are. Seller said that he got it from ex Apple employee.

These came with the Mac I recently acquired. I am still getting my feet wet on identifying RAM. Can you help me identify these and their size. If you can guide me on how to read these that would be very helpful. All I know is that these are 72 pins.

I am looking for driver to format MO disk on Olympus MO drive. I tired two extensions mention in below thread. The one suggested by MrFahrenheit loaded successfully but keep giving error “this device cannot be handled”. I tried to install the second extension “MO Format master” I think it’s...