Search results

If anyone does find to the 50 pin connector pinout for the 5300 or the 190 then please post it.

Well, if I get another panel Well, if I get another panel I might just see if I can even get to them.

Thanks. I can verify that at least the VSS (GND) and a couple of other lines, like the 14 and 16 pins being tied together, are correct. I can only assume the rest are right. If I knew the pinout of the 50 pin connector on the 190 or 5300 then I could tell more but I have not found that either.

Where are the driver chips normally?

Yup. Model number LM-CJ53-22NAK.

Would love a datasheet. I cannot find one anywhere. I think you are right. The connector cable on the bottom left is flakey and if bumped wrong will take out the bottom half. Might have to look around for a cheep one.

I have a PowerBook 5300 that I got for parts and ended up fixing it up and now it runs fine except for the LCD. I replaced the LCD with a black and white screen from a PowerBook 190 and everything worked but the original color screen was just a yellow bar in the middle of the LCD. I started...

Does anyone know where I can find information on the monitor? Inside it says that it is a Zenith Electronic Corp model 19MOM3.

So I have a monitor that is supposed to work with the video card. I had to switch pins 1 and 2. I might ave to swap pins 5 and 6 but I don’t understand pin 6? What I found out while looking at the connection to the monitor is that there are the connections: 1 - video signal A 2 - nothing 3 -...

I have the cable from the card to the back of the computer so I don’t need that. What I do need is for someone to pin out the cable from the back of the computer to a two page display. Does anyone have a service manual for the two page display or can they pin out the DB9 cable that comes with...

I know that this is an old thread but I thought I would help out people in the future. I have been trying to get my Mobius-30 card display output going to HDMI for a while now. First thing I want fix from above is the position of pin 1. I doctored the picture because I don't have one myself...