If it's a Catalyst machine, it shouldn't have an issue taking the MP card. You'll almost certainly need to install the extension for whichever one it is, but beyond that it should work.
From everything I see, these do not have NuBus slots, so the Rocket will not work at all.
I'll have to take some tonight. Are both of your top caps missing? I still have 1 one of mine and am thinking about getting it scanned and printed. We have the identical model, so maybe making 3 would be worth it...
I technically wrapped this late last week, but after on-and-off working to get my 66MHz BeBox running, I can proudly report that it lives!
As it turns out, the S3 GPU I was using had partial compatibility (displaying the splash and bootrom screens) but wouldn't go past that. I finally bit the...
Thanks for the assist. I believe the issue was that switch 1 on the Zulu was on, causing a HDD driver conflict. System is fully up and running without issues.
I believe it was off by default, but I'll ensure it is for my next try.
I've tried both. The drives don't have to be formatted specifically as HFS+ beforehand, do they? I've found that the option is grayed out from Disk Setup.
I've tried standard and clean install (at least for 9, since it will...
I've spent the last few days trying to install 8.6 and 9 on a PowerComputing clone. OS 8 and 8.1 will install without issue, but 8.6 install reports "not enough free memory" and 8.6 update will try to launch but hang. OS 9.0 will go through install but run into a number of errors.
HW specs...
On the topic of Kaleidoscope themes, I've saved a bunch that may or may not have been formally uploaded anywhere. Just let me know if you'd like my collection packed up and shared.
I also have an ever-growing icons folder if you'd consider doing that as well.
Just saw this thread. Yours is in far better condition than mine, although we have "matching" stuck pixels.
Looks like I'll be fixing my stand with the guide Tweedy linked.
Sorry, it's the new RP2040c that this thread is about. Configuration on it is a tested working preinstalled image on the SD. When inside the enclosure, attached via a DB25-DB25 cable, it'll flash SD not detected, yet if I directly attach it to the internal connection (same bus) it boots normally.
I'm trying to get one to work inside of an external enclosure but I can't get it to be recognized by the system. I also have a full sized v1.1 that I'm currently using as an internal drive that I could switch out, but using the Compact as the internal seems to block any external devices from...